Nilfisk-ALTO 692003 Operating Instructions, Solution, Recovery, Strainer, Control, Valve, Scrub

OPERATING INSTRUCTIONS

SOLUTION	RECOVERY
TANK	TANK
STRAINER
SOLUTION
CONTROL
VALVE
SCRUB	SQUEEGEE
BRUSH
FLOOR	CONTACT

Fig. 39

THE NON-RECYCLING OR STANDARD SCRUBBING MODE

During the scrubbing process, detergent solution water from the solution tank is fed to the solution line. There it is fed to the floor where three disc scrubbing brushes work to dislodge soil. After scrubbing, the dirty solution is vacuumed from the floor and discharged into the containment chamber in the forward portion of the recovery tank, where a system of baffles helps to clarify the solution.

Sensors in each tank will indicate, by lights on the control panel, when the water in the solution tank is too low or when the water in the recovery tank is too high.

1-36	AMERICAN-LINCOLN
	SMART