Nilfisk-ALTO 692003 manual Controls, American-Lincoln, 1-27, Smart, Hopper Lift Switch

CONTROLS

HOPPER

Figure 22

HOPPER LIFT SWITCH

The hopper lift switch is located on the instrument panel as shown in figure 22. The switch controls the operation of the hopper lift system. To raise the hopper for dumping, press and hold the lower half of the switch until the hopper reaches the desired height, then release. To close the hopper press in and hold the upper half of the switch until the hopper closes completely then release.

WARNING

To prevent the hopper from closing while doing maintenance lock the hopper in the open position into place

with the safety arm.

MAIN BROOM

Figure 23

SIDE BROOM and MAIN BROOM SWITCH

The side broom and main broom switch is located on the instrument panel as shown in figure 23. By pressing in the upper half of the switch, the side and main broom are raised and turned off. To lower and turn on both brooms, press the lower half of the switch.

AMERICAN-LINCOLN	1-27
SMART