Nilfisk-ALTO 692003 manual Maintenance, American-Lincoln, 1-51, Smart, Replacing Rear Squeegee

MAINTENANCE

LOOSEN KNOB

TO CHANGE SQUEEGEE BLADE

REMOVE NUT AND TURN

SQUEEGEE BLADE OVER

Fig. 73 Fig. 74

TOP OR REAR SQUEEGEE

BOTTOM OF REAR SQUEEGEE

Fig. 75

REPLACING REAR SQUEEGEE

The squeegee will require service when the inner edge of the blades become round with wear, impairing the wiping action or water pick up.

1.Loosen the four aluminum knobs.

2.Remove the squeegee tool and turn upside down to service the blades or the caster wheels. The squeegee blades are designed to rotate to use an unworn edge.

3.Loosen the clamp bolts.

4.Install blades so that the outer blade is 3/16" longer than the inner blades. This is achieved by assembling the top edge of the blade against the squeegee tool weldment.

5.Reinstall the squeegee clamp band and tighten the clamp bolt.

AMERICAN-LINCOLN	1-51
SMART