MAINTENANCE

MAIN BROOM

Fig. 79

MAIN BROOM

To prevent the broom from setting in one direction and to provide the maximum life of the broom it is recommended that the broom be turned end over end periodically.

MAIN BROOM ADJUSTMENT KNOB

Fig. 80

ADJUSTING THE MAIN BROOM HEIGHT

The main broom adjustment knob for changing the sweep height to compensate for broom wear is located in front of the machine as shown in figure 80. Turning the knob to the left (counterclockwise) will lower the main broom. When changing the sweep height adjustment, it is recommended the knob be adjusted one turn at a time. After adjusting, recheck the sweep pattern to determine if further adjustment is necessary.

TURN KNOB CLOCKWISE = INCREASE SWEEP PATTERN WIDTH

TURN KNOB COUTERCLOCKWISE = DECREASE SWEEP PATTERN WIDTH

AMERICAN-LINCOLN

1-53

SMART

 

Page 53
Image 53
Nilfisk-ALTO 692003 manual Adjusting the Main Broom Height