MAINTENANCE

FLUSH OUT THE RECOVERY TANK WITH

A WATER HOSE OR PRESSURE WASHER

Fig. 76

DRAINING THE RECOVERY TANK

Drive the machine to a draining area. Loosen the knobs on the recovery clean out door and pivot the door to the left as shown in figure 76. With the water hose flush out the bottom of the recovery tank clean out door to remove larger particles of debris.

SOLUTION TANK DRAIN HOSE

SOLUTION TANK DRAIN HOSE

Fig. 77

Fig. 78

DRAINING THE SOLUTION TANK

Lift the cover on the solution/recovery tank. Locate the solution tank drain hose as shown in figure 77. Pull the hose out as shown in figure 78. Open the solution tank drain plug and let the solution tank drain. Clean out and flush the solution tank with a water hose. Tighten the solution tank plug and tuck the solution tank drain hose into place.

1-52

AMERICAN-LINCOLN

 

SMART

Page 52
Image 52
Nilfisk-ALTO 692003 manual Draining the Recovery Tank, Draining the Solution Tank