Timer Recording
4-Key Programming
Up to 16 timer programmes, including weekly and daily programmes, can be recorded up to one month in advance by setting the timer.
For guidance on doing
Preparations
•Confirm that the VCR is on.
•Confirm that the TV is on and the VCR viewing channel is selected.
•Insert a video cassette with an intact erasure prevention tab.
•Check that the clock is set to the correct time. If it has not been set, refer to page 8.
•Set [VCR/TV] switch (22) to [VCR].
Example (In case of [JET NAVIGATOR] is set to [ON].):
Programme position (channel); | 2 |
Date; | 29 October |
Starting time; | 20:02 |
Ending time; | 21:30 |
Tape speed; | LP |
Category; | MUSIC |
(Present date; 16 October) |
|
Operations
1Press [PROG/CHECK] (14) to display the menu for timer programme on the TV screen.
2Press [DATE] (12) to set the date on which the TV programme will be broadcast.
DATE | CH ON | OFF | DATE | CH ON | OFF |
– – – – | – – – | – | 29SA | – – – | – |
CATEGORY : 1 |
| CATEGORY : 1 |
| ||
• The next item will flash after about 2 seconds.
3Press [CH] (11) to select the programme position of the desired TV station.
•Every time you select the programme position, the background changes.
4Press [ON] (10) to set the starting time.
•When it is kept pressed, the indication changes in 30 minute intervals.
5Press [OFF] (21) to set the ending time.
DATE | CH ON | OFF |
|
29SA | 2 2 0 : 0 2 | 2 1 : | 3 0 SP |
CATEGORY : 1
6Press [SPEED] (20) to set the desired tape speed.
•SP provides standard recording time, optimum picture and sound quality.
LP provides double recording time with slightly reduced picture and sound quality.
EP provides triple recording time with slightly reduced picture and sound quality.
Regarding the [A] indication, refer to page 16.
When you play back a tape recorded in the EP mode, the monaural sound may be unstable.
DATE | CH ON | OFF |
|
29SA | 2 2 0 : 0 2 | 2 1 : | 3 0 LP |
CATEGORY : 1
7Press [Cursor] (37) (1) to select the Category. Then, select the desired category by pressing [Cursor] (37)
(3421).
CATEGORY SETTING | CATEGORY SETTING | ||
≥MOVIE | ≥SPORT | ≥MOVIE | ≥SPORT |
≥MUSIC | ≥CHILD | ≥MUSIC | ≥CHILD |
≥DRAMA | ≥NEWS | ≥DRAMA | ≥NEWS |
≥EDUCA | ≥OTHER | ≥EDUCA | ≥OTHER |
≥DOCUM | ≥– – – – – | ≥DOCUM | ≥– – – – – |
| END : MENU |
| END : MENU |
•Alternatively, you can set the category on the Navigator list. (See page 18 for details.)
•This function is activated when [JET NAVIGATOR] is set to [ON]. (See page 10.) When [JET NAVIGATOR] is set to [OFF], proceed to step 9.
8Press [MENU] (7) to make the previous display appears.
DATE | CH ON | OFF |
|
29SA | 2 2 0 : 0 2 | 2 1 : | 3 0 LP |
CHECK : PROG./CHECK
9Press [TIMER (REC)] (19) to switch the VCR over to the timer recording standby mode.
•When [JET NAVIGATOR] is set to [ON] (see page 10), the [PROGRAMME IS COMPLETE. REMAINING PROGRAMME 49.]* message appears.
•When [JET NAVIGATOR] is set to [OFF] (see page 10), the [PROGRAMME IS COMPLETE.]* message appears.
•The VCR will be set to the timer recording standby mode after about 1 minute if [TIMER (REC)] (19) is not
pressed.
*These messages will not appear if timer recording is started immediately after [TIMER (REC)] (19) is pressed.
15