Panasonic NV-MV40GL specifications Before Requesting Service, Operation Press Prog Play

Page 20

Finding a Timer-recorded programme for viewing (Easy Programme Playback)

Allows you to find a timer-recorded programme with One- touch operation and to play it back easily.

Preparation

Set timer recording for the programme you wish to view.

Operation

1Press [PROG PLAY] (5).

As soon as the timer-recorded programme is found, playback starts automatically.

PROG PLAY 2222

To Cancel the Easy Programme Playback:

Press [Stop] (9).

Notes:

The VCR memorises the position at which timer recording is set to the standby mode by pressing [TIMER (REC)] (19) at the start point of Easy Programme Playback.

If you take out the cassette after a timer recording has finished, Easy Programme Playback function does not work.

Before Requesting Service

Message of On Screen Display

The error message is indicated in brackets [ ].

[PLEASE PUT IN A VIDEO CASSETTE.]

[REC/OTR] (41) ([REC] (27)) or [TIMER (REC)] (19) has

been pressed without a video cassette inserted.

#Insert a video cassette.

[PLEASE STOP THE TAPE.]

[TUNER PRESET] has been selected during playback.

#Stop the tape.

[PLEASE SET THE CLOCK.]

[TIMER (REC)] (19), [GUIDE] (13), [PROG GUIDE] (45), [PROG/CHECK] (14) or [TIMER CHECK] (44) has been

pressed when the clock is not set.

#Set the clock.

[PLEASE USE A CASSETTE WITH TAB.]

[REC/OTR] (41) ([REC] (27)) or [TIMER (REC)] (19) has been pressed with a video cassette without an intact erasure

prevention tab.

#Use a video cassette with an intact erasure prevention tab.

[NO TIMER RECORDING HAS BEEN SET.]

[TIMER (REC)] (19) has been pressed with no timer

programmes.

#Set timer recording.

[VCR IS IN THE TIMER STANDBY MODE.]

[VCR-ON/OFF] (1) has been pressed during the timer

standby mode.

#Press the [TIMER (REC)] (19) to release the VCR from the timer standby mode.

[CAN NOT FIND PROG PLAY DATA.]

[PROG PLAY] (5) has been pressed with no programmed

timer recording data.

#Set timer recording.

The VCR will not operate correctly

The symptom description is indicated in brackets [ ].

[The VCR display is not illuminated.]

The mains lead has not been connected.

#Connect the mains lead to the mains supply.

[The VCR display is illuminated but the VCR will not operate.]

The VCR is in the timer mode.

#Press the [TIMER (REC)] (19) to operate the VCR manually.

Safety devices are operating.

#Disconnect the mains lead and wait for 1 minute. Reconnect the mains supply and check functions.

Dew may have formed.

#Do not operate the VCR for 1 hour.

20

Image 20
Contents Contents Video Cassette RecorderCondensation may form in the following cases For your safetyInserting Remote Control Batteries Controls and Components 5453Picture Mode Timer Check Prog GuideProg Play PROG/CHECKSetting the Remote Control to Operate Your TV Connection to a TV using the Audio/Video Input SocketConnections Basic ConnectionsTuning the TV to Your VCR To Change the RF output ChannelPress Menu Operations Hold down Menu 7 for 5 seconds or moreAuto Tuning Using the On Screen Display For Australia Auto Tuning Using the On Screen Display For New ZealandStoring TV Broadcasts in Your VCR Pre-programmed TV Channels Australia onlySetting the Clock of Your VCR To Set the Colour TV System Settings Using the On Screen DisplayTo Make Various Indicators Appear On Screen Display Option Setting Tape SelectJET Navigator OSD RECNtsc Playback PlaybackTo Play Back a Recorded Part Repeatedly Recording To Stop the OTR Recording Before the End To reset the tape counterTo Display the Approximate Remaining Tape Time Recording from an external source Recording VCRVCR in tape refresh standby ModeTimer Recording Key ProgrammingTo Suspend the Timer Recording Standby Mode Setting other Programmes in SuccessionWeekly Timer Recording Daily Timer RecordingPress PROG/CHECK 14 twice Checking a Timer ProgrammeCancelling a Timer Programme Category setting allows you to To Set the CategoryRecorded by the character Icon indicationsWhen Recording Over the Same Location on a Tape To Cancel the Index Search or to Stop Playback Press StopTo Demonstrate the Jet Navigator Function To Check the Recorded Programming Data Time Stamp FunctionBefore Requesting Service To Cancel the Easy Programme PlaybackOperation Press Prog Play Message of On Screen DisplayDirt on the video heads Adjusting the Playback PictureCrystal View Control Specifications