Panasonic NV-MV40GL Storing TV Broadcasts in Your VCR, Pre-programmed TV Channels Australia only

Page 7

Storing TV Broadcasts in Your VCR

The VCR is fitted with its own tuner (just like a normal TV) and can be preset to receive up to 99 TV broadcast stations.

Pre-programmed TV Channels (Australia only)

The local TV broadcast channels 2, 7, 9, 10 and 28 are factory-preset in this VCR.

That is, if you can receive television broadcasts on VHF channels 2, 7, 9, 10 and UHF channel 28, these are already

Auto Tuning Using the On Screen Display For Australia

Introduction

Auto Tuning using the On Screen Display should be performed according to the following method if necessary.

Preparations

Confirm that the TV is on and the VCR viewing channel is selected.

Turn on the VCR and select any programme position except A1 or A2.

Set [VCR/TV] switch (22) to [VCR].

tuned on the programme positions with the matching numbers. However, it is possible to cancel these settings and tune the local TV broadcast channels to any desired programme position.

Auto Tuning Using the On Screen Display For New Zealand

When you use this VCR in New Zealand, need to operate as follows:

Preparations

• Confirm that the TV is on and the VCR viewing channel is

selected.

Operations

1Press [MENU] (7) to display the Main menu on the TV screen.

2Press [Cursor] (37) (34) to select [TUNER PRESET] then press [OK] (23).

MENU

CLOCK SET TUNER PRESET SYSTEM OPTION

SELECT : , OK

END :MENU

MENU

CLOCK SET TUNER PRESET SYSTEM OPTION

SELECT : , OK

END :MENU

• Turn on the VCR and select any programme position except

3 Confirm that [COUNTRY] is set

TUNER PRESET

to [AUSTRALIA].

A1 or A2.

• Set [VCR/TV] switch (22) to [VCR].

CH 1

[OFF]

CLEAR

COUNTRY

[AUSTRALIA]

AUTO TUNE

 

SEARCH

[3]

FINE

 

Operations

1Press [MENU] (7) to display the Main menu on the TV screen.

MENU CLOCK SET

TUNER PRESET SYSTEM OPTION

SELECT :, OK

END :MENU

4 Press [Cursor] (37) (34) to

select [AUTO TUNE] then press

[Cursor] (37) (21) to start the

Auto Tuning.

• When Auto Tuning is

completed, the On Screen

SELECT:

 

 

END :MENU

 

AUTO TUNING

 

 

IN PROGRESS,

 

 

PLEASE WAIT.

 

CH 1

 

SEARCH

100

2 Press [Cursor] (37) (34) to

select [TUNER PRESET] then

press [OK] (23).

MENU CLOCK SET TUNER PRESET SYSTEM OPTION

SELECT :,OK

END :MENU

Display disappears and

programme position 1 is

selected.

Channels that can be Received

END: MENU

The number displayed here is the number of channels still to be auto tuned.

3 Press [Cursor] (37) (34) to

select [COUNTRY] then press

[Cursor] (37) (21) to select

[NEW ZEALAND].

TUNER PRESET

CH 1

 

CLEAR

[OFF]

COUNTRY

[AUSTRALIA]

AUTO TUNE

 

SEARCH

[3]

FINE

 

SELECT:

 

END :MENU

 

TUNER PRESET

CH 1

 

CLEAR

[OFF]

COUNTRY

[NEW ZEALAND]

AUTO TUNE

[3]

SEARCH

FINE

 

 

VHF

UHF

CATV

 

 

 

 

Australia

0-12

28-69

45-470MHz

 

 

 

 

New Zealand

1-11

21-69

45-470MHz

 

 

 

 

Notes:

• Auto Tuning searches for TV stations from VHF minimum to

UHF maximum and memorizes every tuned programme

position. Other programme positions are skipped.

• Auto Tuning takes five or more minutes to complete its

4Press [Cursor] (37) (34) to select [AUTO TUNE] then press [Cursor] (37) (21) to start the

Auto Tuning.

When Auto Tuning is completed, the On Screen Display disappears and programme position 1 is selected.

SELECT:

END :MENU

TUNER PRESET

 

CH 1

 

 

CLEAR

 

[OFF]

COUNTRY

[NEW ZEALAND]

AUTO TUNE

 

 

SEARCH

 

[3]

FINE

 

 

SELECT:

 

 

END :MENU

 

 

 

 

AUTO TUNING

 

 

 

IN PROGRESS,

 

 

 

PLEASE WAIT.

 

CH 1

SEARCH

µ 100

 

 

 

END: MENU

The number displayed here is the number of channels still to be auto tuned.

search.

• If the VCR is not correctly tuned by Auto Tuning, follow the

procedure on page 8.

7

Image 7
Contents Video Cassette Recorder ContentsInserting Remote Control Batteries For your safetyCondensation may form in the following cases 5453 Controls and ComponentsPROG/CHECK Picture ModeTimer Check Prog Guide Prog PlayBasic Connections Setting the Remote Control to Operate Your TVConnection to a TV using the Audio/Video Input Socket ConnectionsOperations Hold down Menu 7 for 5 seconds or more Tuning the TV to Your VCRTo Change the RF output Channel Press MenuPre-programmed TV Channels Australia only Auto Tuning Using the On Screen Display For AustraliaAuto Tuning Using the On Screen Display For New Zealand Storing TV Broadcasts in Your VCRSetting the Clock of Your VCR To Make Various Indicators Appear On Screen Display Settings Using the On Screen DisplayTo Set the Colour TV System OSD REC Option SettingTape Select JET NavigatorTo Play Back a Recorded Part Repeatedly PlaybackNtsc Playback Recording To Display the Approximate Remaining Tape Time To reset the tape counterTo Stop the OTR Recording Before the End Mode Recording from an external sourceRecording VCR VCR in tape refresh standbyKey Programming Timer RecordingDaily Timer Recording To Suspend the Timer Recording Standby ModeSetting other Programmes in Succession Weekly Timer RecordingCancelling a Timer Programme Checking a Timer ProgrammePress PROG/CHECK 14 twice Icon indications Category setting allows you toTo Set the Category Recorded by the characterTo Check the Recorded Programming Data Time Stamp Function When Recording Over the Same Location on a TapeTo Cancel the Index Search or to Stop Playback Press Stop To Demonstrate the Jet Navigator FunctionMessage of On Screen Display Before Requesting ServiceTo Cancel the Easy Programme Playback Operation Press Prog PlayCrystal View Control Adjusting the Playback PictureDirt on the video heads Specifications