Infra-red Transmitter window | Panasonic NV-DV2000EC instruction

17 18 19 20 21 2217 23

DIGITAL VCR

25 26 27 28

Before Use

17Infra-red Transmitter window

18OK button

To start Manual editing and to store the selection on the SET UP or EDIT MENU screen.

19VIDEO INSERT button [R39,41]

For the Video Insert function and the AV Insert function.

20AUDIO INSERT button [R39,41]

For the Audio Insert function and the AV Insert function.

21AUDIO DUB button [R39,41,42]

For the Audio Dubbing function or the Audio Mixing function.

22JOG/SHUTTLE button and lamp [R15,39–51]

To switch to the Jog/Shuttle mode. When the button is pressed, it lights and the VCR enters the Jog/ Shuttle mode.

In the stop mode: Still picture (Jog/Shuttle mode).

During playback: Still picture (Jog/Shuttle mode).

23INPUT SELECT button [R27–35]

To select the A1, A2, A3, A4 or DV IN (DV1 or DV2) external recording source.

24COUNTER RESET button [R18]

To reset the tape counter (elapsed time) to “0:00.00”.

≥The tape counter is automatically reset to

“0:00.00”. when a video cassette is inserted.

≥It is not possible to reset the Time code to “0h00m00s00f ” using COUNTER RESET.

25COUNTER ZERO STOP button [R18]

To use the zero stop function at the tape counter display.

26PLAYER button [R43–51]

To operate this VCR as the playback unit for editing.

27SEARCH SELECT button [R18]

To search for a recorded programme using the index/photoshot index search.

28RECORDER button [R43–51]

To operate this VCR as the recording unit for editing.

29INDEX/PHOTO buttons [R18]

For the index/photoshot index search function.

30STEREO SELECT button [R17,41,42,45,51]

To select the audio track (STEREO1 audio and/or STEREO2 audio) on a tape which was recorded in the 12bit audio mode. During playback, each time the button is pressed, the sound changes as follows:

STEREO1 STEREO2 STEREO1 STEREO2

(MIX)

≥The audio track cannot be selected during the playback of a tape recorded in the 16bit audio mode.

≥When INPUT SELECT is set to DV1 or DV2, the audio track can be selected by STEREO SELECT at any time: it does not have to be during playback.

31VCR1/2/3 switch

Set the switch on the side panel of the editing controller to the appropriate position when more than two or three Panasonic VCRs is being used.

VCR1:	Select this position on both the
	VCR and editing controller for
	normal use with one VCR.
VCR2:	Select this position when using two
	Panasonic VCRs.
VCR3:	Select this position when using
	three Panasonic VCRs.

!" Child Lock buttons [R12]

To set the child lock function when you keep pressing OK and MARK IN for more than five seconds.