Other Editing Functions
DIGITAL VCR
To Insert a New Programme Between Existing Programmes:
Once all programme settings are completed, the screen shown below is displayed.
1 Press 34 (CURSOR) |
to select Insert a |
programme, and then |
press OK. |
≥The programme list is |
displayed. |
Video Insert
Confirm/Change Insert a programme
Erase a programme Preview
Start Assemble Review Timing Adjust
Example: Video Insert
This portion varies, depending
on the editing function that
was programmed.
On Screen Display
Video Insert
Confirm/Change Insert a programme Erase a programme Preview
Start Assemble Review Timing Adjust
2 Press 34 (CURSOR) |
to select the programme |
number where a |
programme is to be |
inserted, and then press |
OK. |
≥The Insert a |
programme screen is |
displayed. |
Insert a programme
PLAYER |
|
|
|
|
1 In | 0h | 16m | 38s | 20f |
Out | 0h | 18m | 09s | 13f |
2 In | 0h | 00m | 01s | 18f |
1 Out | 0h | 01m | 47s | 22f |
3 In | h | m | s | f |
1 Out | h | m | s | f |
4 In | h | m | s | f |
1 Out | h | m | s | f |
To Check and Change a Programme
3 Refer to the pages that | Inser t a programme |
1Press 34 (CURSOR) to select Confirm/ Change, and then press
OK.
≥The programme list is displayed.
2Press 34 (CURSOR) to select the programme number where a programme is to be inserted, and then press
OK.
≥The Confirm/Change screen is displayed.
Video Insert
Confirm/Change
Insert a programme Erase a programme Preview
Start Assemble Review Timing Adjust
Confirm/Change
PLAYER |
|
|
|
|
1 In | 0h | 16m | 38s | 20f |
Out | 0h | 20m | 24s | 10f |
2 In | 0h | 00m | 01s | 18f |
1 Out | 0h | 01m | 47s | 22f |
3 In | h | m | s | f |
1 Out | h | m | s | f |
4 In | h | m | s | f |
1 Out | h | m | s | f |
describe the Programme | 1 | PLAYER |
|
; |
| ||
Editing functions |
|
| 0h32m41s25f |
| In | 0 h 00 m 00 s 00 f | |
| Out | 0 h 00 m 00 s 00 f |
new programme.
4When setting is complete, press OK.
To Cancel a Programme:
1 Press 34 (CURSOR) |
| Video Insert |
to select Erase a |
| Confirm/Change |
| Insert a programme | |
programme, and then |
| |
| Erase a programme | |
| Preview | |
press OK. |
| |
| Start Assemble | |
≥The programme list is |
| Review |
| Timing Adjust | |
displayed. |
| |
|
|
To check the programme list for the recording unit press RECORDER.
To just confirm the programme settings, press EDIT MENU.
If corrections are needs, continue with the procedure described below.
3 | Press JOG/SHUTTLE. |
|
|
4 | Use the Jog Dial/Shuttle | Programme change | |
| Ring to search for the | 1 |
|
| ; PLAYER | ||
| editing point that is to be | In | 0h18m09s13f |
| corrected. | 0h16m38s20f | |
| Out | 0h18m09s13f |
5To change an edit start point, press MARK IN.
To change an end point, press MARK OUT.
6Once all changes ares completed, press OK.
2Press 34 (CURSOR) to select the programme number to be erased, and then press OK.
52