Panasonic NV-DV2000EC Editing Controller Setup, Child Lock Function, Installing the Batteries

Editing Controller Setup

Installing the Batteries

1To remove the cover, slide it in the direction of the arrow while pressing down.

Inserting the Cassette/ Child Lock Function

Be sure to insert the cassette with the window side facing upwards until it is taken into the VCR.

Press EJECT and remove the cassette from the video unit.

7

8

2Load the batteries with their polarity (+ and -) aligned correctly.

d

e d

e

3Slide the cover back on.

Power Source for the Editing Controller

The editing controller is powered by 2 AA, UM3 or R6 size batteries. The life of the batteries is about one year, although this depends on the frequency of use.

Precautions for Battery Replacement

≥Load the new batteries with their polarity (+ and -) aligned correctly.

≥Do not apply heat to the batteries, or an internal short-circuit may occur.

≥If you do not intend to use the editing controller for a long period of time, remove the batteries and store them in a cool, dry place.

≥Remove spent batteries immediately and dispose of them.

≥Do not use an old and a new battery together, and never use an alkaline battery with a manganese battery.

≥Do not use rechargeable batteries.

Child Lock Function

When you do not want other people to operate the VCR. Holding down OK and MARK IN until “!"” and “hold” appears more than 5 seconds in the VCR display will deactivate all buttons. Any external commands will not be processed by the VCR.

To cancel this function, repeat the same procedure until “!"” and “hold” disappears.

≥If a button is pressed while the Child Lock function is on, “!"” and “hold” appears in the VCR display.

≥When the power is disconnected, the Child Lock function is automatically cancelled after backup time.

DIGITAL VCR

12