Panasonic NV-DV2000EC Playback Unit VHS VHS Video Equipment with an Edit socket

Page 33

Playback Unit

[S-VHS (VHS) Video Equipment with an Edit socket]

1Turn on the Video Equipment.

2Set the unit so that it is ready to be controlled.

Read the operating instructions of the playback unit and make the necessary settings.

Connecting the NV-DV2000 as the Playback VCR to an S-VHS (VHS) VCR

Follow the procedure described below.

Use AV cables to connect the output sockets on the NV-DV2000 with the input sockets on the S-VHS (VHS) VCR.

Press INPUT SELECT on the NV-DV2000 so that A2, A3 or A4 is selected.

Connect two TVs, one to the NV-DV2000 and one to the S-VHS (VHS) VCR, so that the screens from both VCRs can both be seen.

Set Edit Mode on the NV-DV2000 to PLAYER.

Make the necessary editing control settings for the S-VHS (VHS) VCR. Read the operating instructions of S-VHS (VHS) VCR.

Recording VCR

(the NV-DV2000)

1Turn on the VCR.

2Set Edit Mode to RECORDER.

3Set Edit Terminal to EDIT.

4Press INPUT SELECT so that A2, A3 or A4 is selected.

Hint:

When the “TBC” and “REC 3D DNR” functions activate, you can record with the clear pictures. [R17,23,24]

Preparations for Editing

2000

Note:

Audio Insert and AV Insert are not possible in this

configuration.

33

Image 33
Contents Digital Video Cassette Recorder NV-DV2000ECDear Customer For Your SafetyContents Keep the VCR away from high temperatures Avoid sudden changes in temperatureCleaning the VCR Avoid humidity and dustBefore Use How to Replace the Fuse For your safety please read the following text carefullyEdit cable 1 pc DV cable 1 pc Batteries for the Editing Check ListFront Controls and Connection SocketsInfra-red receiver window Cassette compartment Mixing Edit button R42Rear Editing Controller SET UP buttonEdit Menu button Jog Dial/Shuttle Ring R15,39-51Jog Dial inner dial31 VCR1/2/3 switch Counter Reset button R18Infra-red Transmitter window Counter Zero Stop button R18Installing the Batteries Editing Controller SetupPower Source for the Editing Controller Precautions for Battery ReplacementSetting Up Connections Using a 21-Pin Scart CableConnections Using an S-Video Cable Connection to a Stereo Amplifier Connection to a Stereo Amplifier/ Connection to a DecoderConnection to a Decoder HintPlayback Playback1 2 4,5 One-Touch Recording OTR RecordingTo Display the Remaining Tape Time To Select the Desired Tape SpeedOther Playback and Recording Functions 3D DNR FunctionsTo Ensure a Stable and Shake-Free Recording Picture TBC Index Search System Search FunctionsPhotoshot Index Search System To return to a specified scene zero stop functionSet Edit Terminal to EDIT, and Edit Mode to Using the VCR with a Video PrinterOperations Video PrinterUsing the VCR with a Computer Clock Setting/Shipping Condition To set the clockTo Initialise VCR Functions and Edit Functions Audio Data Indicator Audio Output Mode Indicator Settings for VCR FunctionsIndex/Photoshot Index Search Indicator Tape running displaySetting for TBC Function To Set the Colour modeVCR display Comb filterTo Set the Remote mode Settings for 3D DNR REC DNR/PB DNR FunctionFor Recording For PlaybackPreparations for Editing Editing FunctionsAudio Dubbing Audio MixingAssemble Editing Creating the Tapes for Editing AV1 Rear Recording Unit Playback Unit Connecting with a Panasonic Digital Video CameraPlayback Unit Digital Video Camera Set Edit Mode to Recorder Set Edit Terminal to EditRecording Unit NV-DV2000 Turn on the VCRFront Recording VCR Playback VCRRecording VCR Playback VCRControlling the Recording VCR through the Playback VCR Recording VCRPlayback Unit AV2 Rear AV1 Rear Recording Unit Connecting an S-VHS VHS Video Equipment with an Edit SocketPlayback Unit VHS VHS Video Equipment with an Edit socket Recording VCR NV-DV2000Press Input Select so that A2, A3 or A4 is selected Connecting a Video Equipment with a Lanc Socket Set Edit Terminal to 8mm Playback Unit Video Equipment with a Lanc socketSettings for Editing Audio modeSearch with Sound Setting for Album Function Setting for One-Touch-EditPress 21 Cursor to select OFF or ON, and then press OK Press 34 Cursor to select Still Album and press OKOperations Press Still Album to Album FunctionQuick Editing when Not Using an Edit CableOne-Touch Assemble Editing One-Touch Insert/Audio DubbingFor 62,4≥ The picture from the playback unit Press Audio DUB on the Editing ControllerAppears on the screen Press Mixing EditManual Copying Operations Press Edit MenuTo select Start Copying. Player Select Audio Insert Manual InsertPress Player and JOG/SHUTTLE Press Recorder and JOG/SHUTTLETo Listen to the Edited Audio after Audio Dubbing Manual Audio Dubbing10,11 Programme AssembleTo interrupt editing or Review Programme5,8 Programme InsertVideo Insert Audio InsertTo interrupt editing, Preview or Review Programme Audio Dubbing To continue setting programmes Press Player and JOG/SHUTTLETo check and change Programmes Select Confirm/ChangeProgramme Editing To interrupt editing, Preview or Review≥ Audio Dubbing is not possible in the following Other Editing Functions To Cancel a ProgrammeTo Insert a New Programme Between Existing Programmes To Check and Change a ProgrammeTwice To Cancel All Editing ProgrammesTo select Erase all Programmes , and thenTo select Timing Adjust Edit Timing AdjustmentAdjust the timing for Edit start point by settingHelpful Hints Tape Trade Editing Glossary of Terms Marked with an index signalThis function improves the horizontal shaking Subtle distortion in the vertical lines which tend to takeCopying, Assemble, Video Insert, and Audio Insert DV TerminalMessages of On Screen Display for Editing Operations On Screen Display MessagesVCR does not operate correctly Before Requesting ServicePlayback does not operate correctly Recording does not operate correctlyEditing Controller does not work correctly SET UP On Screen Displays Flow Chart for On Screen DisplaysEdit Menu On Screen Display Manual Editing Programme EditingR64 Programme Editing Programme Editing On Screen DisplaysConfirm/Change Specifications Page F0600Gy0 1500A