Panasonic NV-DV2000EC operating instructions Editing when Not Using an Edit Cable, Quick

Editing when Not Using an Edit Cable

To connect a VCR or Video Movie Camera without an Edit socket and use the NV-DV2000 as the Recording VCR.

4 2

DIGITAL VCR

OK

4 6

Preparations

≥Complete necessary connections and settings. [R28–35]

≥Connect the AV1 socket on the NV-DV2000 to the TV.

≥Connect the AV2 socket or the AUDIO/VIDEO/S- VIDEO IN (AV3/AV4) sockets on the NV-DV2000 to the playback unit.

Set INPUT SELECT on this VCR as follows:

A2:	Through the AV2 socket
A3:	Through the AV3 sockets
A4:	Through the AV4 sockets

≥If the playback unit has a DV terminal, connect to the DV1 or DV2 on the NV-DV2000 with a DV cable.

Operations

1Using the controls on the playback unit, search for the edit start point, and then pause the playback.

2Press JOG/SHUTTLE on the recording VCR, and check that the button is lit.

3Search for the edit start point.

4Press the button for the editing mode on the NV-DV2000.

To copy the contents of the tape in the playback unit as is: Press ¥ (REC).

To insert picture: Press VIDEO INSERT.

To insert sound: Press AUDIO INSERT.

To insert picture and sound: Press VIDEO INSERT and then press AUDIO INSERT(or vice versa).

To add new sound: Press AUDIO DUB.

For Audio Mixing: Press AUDIO DUB and then press MIXING EDIT on the front panel.

≥The Audio Mixing procedure differs in part from other editing operations. [R42]

5 3

5Press ;/D (PAUSE/SLOW) on the NV-DV2000 and start playback on the playback unit simultaneously. ≥ Editing begins.

6Press ∫ (STOP) on the NV-DV2000, and then press STOP on playback unit to stop editing.

Notes:	Editing
¡ Although Copying can be performed in LP mode,
Insert and Audio Dubbing cannot be performed with a
tape recorded in LP mode. It is necessary to first
copy the tape in SP mode.
¡ Video Insert and Audio Insert are not possible in	Quick
the following cases:
When the tape in the recording VCR (the NV-DV2000)
is:
Recorded in LP mode;
Blank, or contains a blank portion in the middle.	For
¡ AV Insert, Audio Dubbing and Audio Mixing are
not possible in the following cases:
When the tape in the recording VCR (the NV-DV2000)
is:
Recorded in 16bit audio mode;
Recorded in LP mode;
Blank, or contains a blank portion in the middle.
When INPUT SELECT is set to DV1 or DV2.
¡ If the time display on the NV-DV2000 is set to tape
counter mode during editing, the NV-DV2000 stops
the editing operation automatically when the counter
reaches “0:00.00”.
(This function does not work when using the Copying
or Audio Dubbing functions.)

39