Pelco operation manual Pelco Manual C690M-E 11/04

d.Under Cam. Command, if desired use the pull-down menu to select None, Go Preset (send the camera to the presets), or Run Pattern (activate a pattern). You set patterns and presets in live video.

This feature lets you run a pattern or go to a preset based on a data event. You can reset Spectra or Esprit positions in half-hour increments. The DVR will process this command at the beginning of each half hour. While both Spectra and Esprit incorpo- rate this feature as a home position, the DX2000 lets you select different positions depending on the time of day.

For example, during the day you want the outside corner mount PTZ camera to look at the front parking lot, but at night it should cover the loading dock at the side of the building or run a pattern between both areas.

e.Under Value, if desired use the pull-down menu to select the number of the preset or pattern to run.

f.Click the Save button. The program returns you to the Record On Data screen.

5.Under the Duration heading, use the pull-down menu to select the number of seconds that recording will continue.

6.Click Save to save the values or Cancel to abandon.

Refer to the Disk Allocation/Disk Partitions section for information on partition setup information.

50 Pelco Manual C690M-E (11/04)