8.If you want to save the changes to the DVR, click the Yes button. The program displays the picture for that camera (Figure 15).
Figure 15. Motion Selection Screen
The entire picture is active for motion detection (the default is All mask OFF).
a.Position the cursor in the picture where you want to deactivate motion recording, and then click. A darker square appears on the picture. Motion in the darker squares will not trigger recording. Repeat as desired. You can remove a dark square by clicking on it.
You can deactivate all squares by clicking on the All mask ON button. You can also activate all bright squares by clicking on the All mask OFF button.
You can activate a group of squares by holding down the mouse button and slowly dragging.
Pelco Manual | 41 |