7. Use the pull-down menu in the Data Encoding row to select one of the following:
Selection | Meaning |
ASYNC | Asynchronous data encoding |
SNA/SDLC (NRZ) | SNA/SDLC data encoding, NRZ bit format |
SNA/SDLC (NRZI) | SNA/SDLC data encoding, NRZI bit format |
8.Use the pull-down menu in the BAUD Rate row to select a transfer rate.
9.Use the pull-down menu in the Data Bits row to select either 8-bit or 7-bit data. Note that only a DX2000 Data Hub (DX2000DH) can receive 7-bit data with the parity set to None.
10.Use the pull-down menu in the Parity row to select parity (NONE, ODD, or EVEN). Note that only a DX2000 Data Hub (DX2000DH) can receive 7-bit data with the parity set to None.
11.Stop Bits are always automatically detected.
12.The Printer row is only visible for ATM device types. Use the pull-down menu in the Printer row to select one of the following:
Selection | Meaning |
Receipt | Accept receipt printer data only. |
Journal | Accept journal printer data only. |
Both | Accept both receipt and journal printer data. |
Pelco Manual C690M-E (11/04) | 53 |
