Pelco dx8100-exp installation manual Installing the DX8100 I/O Card

Page 11

To install the DX8100 I/O card in slot 7:

1.Remove the Rear Cross Brace. Refer to item 14 in Figure 7 on page 9.

2.Do the following:

a.Remove the slot cover for slot 7 and retain the screw.

b.Insert the DX8100 I/O card into the slot 7 opening and secure the I/O card bracket with the screw.

c.Insert the 4-wire DX8100 power plug into the I/O card power connector CN302.

d.Insert the 5-pin Alarm and Relay cable into the DX8100 I/O card Alarm and Relay connector CN303. The other end of the cable inserts into the optional Capture Card. For information about installing the optional Capture Card, refer to Installing the Capture Card on page 12.

e.Insert the 32-pin ribbon cable into the video connector CN304.

3.This completes installation of the DX8100 I/O card. Continue to Installing the Capture Card on page 12.

Figure 9. Installing the DX8100 I/O Card

C2636M-B (4/07)

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents DX8100-EXP Expansion Unit Installation Manual Page This document is organized into the following sections IntroductionParts List Table C. DX8100 Expansion Unit Kit Items Other DX8100 Optional AccessoriesTable D. DX8100 Optional Accessories Tools NeededGetting Ready Unplug the power cord from the wall socketC2636M-B 4/07 Open the DX8100 Chassis Prepare DX8100 for Expansion Unit InstallationComponent Layout Slot 1 PTZ card installed in PCI connectorTV/Audio cable Video ribbon cable 32-pin DX8100 I/O card Install the DX8100 I/O CardInstalling the DX8100 I/O Card Pin ribbon cable Installing the Capture CardInstalling the Optional Capture Card To reassemble the DX8100 Reassemble the UnitConnecting the Expansion Unit to the DX8100 Interfacing the Expansion Unit and DX8100 Restarting the Unit Power on the DX8100Revision History Product Warranty and Return Information ISO9001
Related manuals
Manual 20 pages 58.48 Kb
Top Page Image Contents