Introduction
Welcome to the
If you ordered the DX8124 or DX8132 model DVR, the optional Capture Card and DX8100 I/O card are already installed. Use the Expansion cable to connect the Expansion Unit to the DX8100. For information about connecting the DX8100 Expansion Unit to the DX8100 DVR, refer to Connecting the Expansion Unit to the DX8100 on page 15.
This document is organized into the following sections:
•Introduction on this page
•Getting Ready on page 6
•Prepare DX8100 for Expansion Unit Installation on page 8
•Install the DX8100 I/O Card on page 10
•Installing the Capture Card on page 12
•Reassemble the Unit on page 14
•Connecting the Expansion Unit to the DX8100 on page 15
The following figures show the front and back of the Expansion Unit.
Figure 1. DX8100-EXP Expansion Unit (Front)
Figure 2. DX8100-EXP Expansion Unit (Back)
3 |