Pelco dx8100-exp installation manual Interfacing the Expansion Unit and DX8100

Page 16

To connect the Expansion Unit to the DX8100 DVR:

1.Do one of the following:

Desktop mounting: Set the Expansion to the side or on top of the DX8100.

Rack mounting: Attach the rack mount kit and install the Expansion Unit in the rack enclosure directly above the DX8100.

2.Connect the 50-pin Expansion cable end (partially shown in Figure 15) to the Expansion Unit connector, and then connect the 50-pin Expansion cable end to DX8100 I/O card.

3.Plug the power cord back into the DX8100 and then into the wall.

Figure 15. Interfacing the Expansion Unit and DX8100

16

C2636M-B (4/07)

Image 16
Contents DX8100-EXP Expansion Unit Installation Manual Page Introduction This document is organized into the following sectionsParts List Other DX8100 Optional Accessories Table D. DX8100 Optional AccessoriesTools Needed Table C. DX8100 Expansion Unit Kit ItemsUnplug the power cord from the wall socket Getting ReadyC2636M-B 4/07 Prepare DX8100 for Expansion Unit Installation Open the DX8100 ChassisSlot 1 PTZ card installed in PCI connector Component LayoutInstall the DX8100 I/O Card TV/Audio cable Video ribbon cable 32-pin DX8100 I/O cardInstalling the DX8100 I/O Card Installing the Capture Card Pin ribbon cableInstalling the Optional Capture Card Reassemble the Unit To reassemble the DX8100Connecting the Expansion Unit to the DX8100 Interfacing the Expansion Unit and DX8100 Power on the DX8100 Restarting the UnitRevision History Product Warranty and Return Information ISO9001
Related manuals
Manual 20 pages 58.48 Kb