Pelco dx8100-exp installation manual Install the DX8100 I/O Card

Page 10

Install the DX8100 I/O Card

The DX8100 I/O card comes in a separate box that contains the DX8100 I/O card and two cables: a 5-pin alarm and relay cable and a 32-pin video input ribbon cable. For information about the other DX8100 Expansion Unit kit components, refer to Parts List on page 4.

The I/O card is installed in slot 7 and does not insert into a slot on the motherboard. The DX8100 I/O card receives power from the DX8100 and provides power for the DX8100 Expansion Unit.

Figure 8. DX8100 I/O Card and Cables

Table F describes the items included with the DX8100 I/O card.

Table F. DX8100 I/O Card and Accessories

Item

Description

TV/Audio cable

Video ribbon cable (32-pin)

DX8100 I/O card

10	C2636M-B (4/07)

Image 10

Contents DX8100-EXP Expansion Unit Installation Manual Page Introduction This document is organized into the following sectionsParts List Tools Needed Other DX8100 Optional AccessoriesTable D. DX8100 Optional Accessories Table C. DX8100 Expansion Unit Kit ItemsUnplug the power cord from the wall socket Getting ReadyC2636M-B 4/07 Prepare DX8100 for Expansion Unit Installation Open the DX8100 ChassisSlot 1 PTZ card installed in PCI connector Component LayoutInstall the DX8100 I/O Card TV/Audio cable Video ribbon cable 32-pin DX8100 I/O cardInstalling the DX8100 I/O Card Installing the Capture Card Pin ribbon cableInstalling the Optional Capture Card Reassemble the Unit To reassemble the DX8100Connecting the Expansion Unit to the DX8100 Interfacing the Expansion Unit and DX8100 Power on the DX8100 Restarting the UnitRevision History Product Warranty and Return Information ISO9001

Related manuals

Manual 20 pages 58.48 Kb