Pelco dx8100-exp installation manual Component Layout, Slot 1 PTZ card installed in PCI connector

Page 9

COMPONENT LAYOUT

Figure 7 shows the slots and the DX8100 Series DVR’s major components. Some detail is removed from the illustrations in this manual for the purpose of clarity. (Slots on the motherboard are labeled differently.)

REAR

OF

DVR

FRONT

OF

DVR

Figure 7. DX8100 Interior

Table E describes the DX8100’s slot assignments and major components.

Table E. DX8100 Slot Assignments and Major Components

Item

Description

Item

Description

Slot 1: PTZ card installed in PCI connector

CPU

Slot 2: Capture Card installed in PCI connector

Power supply

Slot 3: PCI connector

DIMM sockets (RAM)

Slot 4: x1 PCI Express connectors

DVD-RW

Slot 5: x1 PCI Express connectors

Hard drive bay

Slot 6: x16 PCI Express connector

Front cross-brace

Slot 7: Optional Expansion Unit I/O card

Rear cross-brace

C2636M-B (4/07)

9

Image 9
Contents DX8100-EXP Expansion Unit Installation Manual Page This document is organized into the following sections IntroductionParts List Table D. DX8100 Optional Accessories Other DX8100 Optional AccessoriesTools Needed Table C. DX8100 Expansion Unit Kit ItemsGetting Ready Unplug the power cord from the wall socketC2636M-B 4/07 Open the DX8100 Chassis Prepare DX8100 for Expansion Unit InstallationComponent Layout Slot 1 PTZ card installed in PCI connectorTV/Audio cable Video ribbon cable 32-pin DX8100 I/O card Install the DX8100 I/O CardInstalling the DX8100 I/O Card Pin ribbon cable Installing the Capture CardInstalling the Optional Capture Card To reassemble the DX8100 Reassemble the UnitConnecting the Expansion Unit to the DX8100 Interfacing the Expansion Unit and DX8100 Restarting the Unit Power on the DX8100Revision History Product Warranty and Return Information ISO9001
Related manuals
Manual 20 pages 58.48 Kb