Pelco dx8100-exp installation manual Tools Needed, Other DX8100 Optional Accessories

Page 5

TOOLS NEEDED

Table C. DX8100 Expansion Unit Kit Items

Qty Description

1

Phillips screwdriver #1 (nonmagnetic)

1

Properly grounded ESD wrist strap and mat

4

Small containers for storing screws (optional)

OTHER DX8100 OPTIONAL ACCESSORIES

The DX8108 base unit comes with an 8-channel Capture Card and the DX8116 base unit includes a 16-channel Capture Card. When considering adding the audio option:

The DX8108-AUD audio card is installed on the 8-channel Capture Card. The DX8108-AUD audio card can be installed on a 16-channel Capture Card. In this case, only audio inputs 1 to 8 are available for recording. Audio channels 9 to 16 can be configured but audio data is not recorded.

The DX8116-AUD audio card is installed on the 16-channel Capture Card. The DX8116-AUD audio card cannot be installed on an 8-channel Capture Card.

The table below describes other DX8100 optional accessories that can be installed along with the Expansion Unit. For a list of the current DX8100 options, refer to the DX8100 Product Specification sheet. Refer to the documentation supplied with the optional accessories for instructions on how to install those accessories.

Table D. DX8100 Optional Accessories

Option Number

Description

 

 

DX8108-AUD

DX8100 8-channel audio input card

 

 

DX8116-AUD

DX8100 16-channel audio input card

 

 

DX8100-512RAM

DX8100 memory upgrade from 512 MB to 1 GB

 

 

KBD300A

KBD300A universal keyboard (requires KBDKIT)

 

 

KBDKIT (-X)

Remote keyboard wiring kit (X = 220 VAC)

 

 

VSI-PRO

AVE® video serial interfaces for ATM/POS*

 

 

*The VSI-PRO and required cabling is available from AVE.

C2636M-B (4/07)

5

Image 5
Contents DX8100-EXP Expansion Unit Installation Manual Page This document is organized into the following sections IntroductionParts List Table D. DX8100 Optional Accessories Other DX8100 Optional AccessoriesTools Needed Table C. DX8100 Expansion Unit Kit ItemsGetting Ready Unplug the power cord from the wall socketC2636M-B 4/07 Open the DX8100 Chassis Prepare DX8100 for Expansion Unit InstallationComponent Layout Slot 1 PTZ card installed in PCI connectorTV/Audio cable Video ribbon cable 32-pin DX8100 I/O card Install the DX8100 I/O CardInstalling the DX8100 I/O Card Pin ribbon cable Installing the Capture CardInstalling the Optional Capture Card To reassemble the DX8100 Reassemble the UnitConnecting the Expansion Unit to the DX8100 Interfacing the Expansion Unit and DX8100 Restarting the Unit Power on the DX8100Revision History Product Warranty and Return Information ISO9001
Related manuals
Manual 20 pages 58.48 Kb