Pelco dx4000 manual Video Control Buttons on the Front Panel of the DX4000

Page 12

VIDEO CONTROL BUTTONS ON THE FRONT PANEL OF THE DX4000

Figure 4. Control Buttons on the Front Panel

Several control buttons are located on the front panel of the DX4000. Use these buttons to navigate through menus, to control PTZ and focus on cameras, and to search for and play back video. The control buttons perform the following functions when you are playing back recorded video:

ì

î

ï

ñ

ó

r s

Fast reverse: Plays the video backward at a fast speed.

Increase forward or reverse: Increases the speed of the current play direction (forward or reverse).

Play forward: Plays the video forward.

Fast forward: Plays the video forward at a fast speed.

Play reverse: Plays the video in reverse.

Decrease forward or reverse: Decreases the speed of the current play direction (forward or reverse).

Pause: Stops the video and displays the current frame of the video.

12	C2602M-C (3/07)

Image 12

Contents DX4000 Digital Video Recorder Page Contents Page List of Figures List of Tables Regulatory Notices Radio and Television InterferenceDescription Features ModelsConnecting Devices to the DX4000 Overview of the SystemDX4000 Controls Controls on the Front Panel of the DX4000T u ~í ~â Video Control Buttons on the Front Panel of the DX4000 Control Buttons on the Front PanelOperating the DX4000 from the Remote Control U ~í ~âBefore You Begin Starting and Stopping the DX4000To start the DX4000 Choosing a User Account To stop the DX4000Main Window Overview Changing the Display Mode To change the screen sequencing modeChanging the Information Displayed on the Monitor Adjusting Menu Settings Display MenuRecord Menu Camera Menu Audio MenuAlarm Menu Use the Alarm menu to set up alarms and relays for camerasSystem Menu System MenuChanging Passwords Password MenuResetting Passwords To reset the passwordsFactory Default Settings Factory Default Reset Warning MessageScreen Rotation Mode Changing the Screen LayoutScreen View Selection Adjusting the Focus or Iris on a Camera Controlling Cameras from the DX4000PAN, TILT, and Zoom Controls Working with Presets To create a presetTo run a preset To run a predefined presetUsing Preset To set up a patternWorking with Patterns Modifying Camera Settings To modify camera settingsTo run a pattern C2602M-C 3/07 Modifying Audio Settings To modify audio recording settingsTo modify live audio settings Modifying Image Recording Settings To modify image recording settingsModifying Alarms and Relays To modify alarm inputsTo modify relay outputs C2602M-C 3/07 Setting UP a Recording Schedule Creating Recording SchedulesC2602M-C 3/07 Setting UP Motion Detection Recording Motion Detection Setup MenuC2602M-C 3/07 Setting UP ALARM-BASED Recording C2602M-C 3/07 To change the screen mode To view a specific video channel in single modeMonitoring Live Video Working with Recorded Video Searching for VideoTimeline Showing Available Recorded Video C2602M-C 3/07 Playing Recorded Video Backing UP VideoTo back up video Missing Media Warning Message Working with the Remote Agent Application About the Remote AgentOverview of the Main Screen Remote Agent Control Buttons Starting and Stopping the Remote AgentTo start the remote agent To stop the remote agentConfiguring the Remote Agent To configure optional settings on the remote agentTo create a network connection for the DX4000 Configuring the DX4000 from the Remote Agent Configuring the DX4000 from the Remote AgentRecording Settings To set up recording qualityTo set up recording schedules To set up alarm recording To set up motion detectionAppears and the Remote Agent tab is displayed C2602M-C 3/07 Camera Settings To configure camerasAudio Settings To set up audio recordingTo set up live audio Alarm Settings To set up alarm inputs and relay outputsSystem Settings To configure buzzer soundsTo review system information To modify passwords To configure the disk write modeTo disconnect remote agent connections Controlling Cameras from the Remote Agent To set the network speedTo control PTZ cameras To adjust the focus To adjust the irisLook for the Iris button on the PTZ controls To set up a preset Completing the Setup for a PatternTo use Preset Using PresetTo listen to or disable audio Monitoring Live Video from the Remote AgentCapturing Live Video from the Remote Client Controlling AudioWorking with Recorded Video on the Remote Agent Searching for Recorded VideoTo search by date or time Click the Log button . The Search Log screen appearsBacking UP Video To search by eventClick the Search Events button To save a snapshot Save as... dialog box appearsTo print a snapshot Print screen appearsViewing Video with the Backup Player To view recorded video with the backup player To authenticate recorded video with the backup playerClick the Open file button. The following screen appears About the Web Client Starting the WEB ClientClick the Connect button . The Login dialog box appears Monitoring Video with the Web ClientC2602M-C 3/07 Product Warranty and Return Information ISO9001

Related manuals

Manual 36 pages 44.82 Kb

Manual 74 pages 2.6 Kb