Pelco dx4000 manual Camera Menu, Audio Menu

Page 20

CAMERA MENU

Figure 14. Camera Menu

Use the Camera menu to adjust settings on cameras attached to the DX4000.

•Status/Title Setup: Use this option to review the status information and to set up the title for each camera. Titles will appear on the video panes if you enable this option on the Display menu.

•Covert/PTZ Setup: Use this option to set the covert operation for cameras and to select the PTZ protocol used by each camera. If a camera is set to covert operation, the DX4000 records video from it but does not display it. The DX4000 supports several PTZ protocols. Follow the camera manufacturer’s recommendations when choosing the PTZ protocol for your cameras.

•Color Setup: Use this option to configure the brightness, contrast, color, and tint for each camera. The default value for each setting is 50. You can adjust these settings between 1 and 100.

AUDIO MENU

Figure 15. Audio Menu

Use the Audio menu to set up the audio recording for video. These settings will take effect if a camera attached to the DX4000 also supports audio.

•Audio Recording Setup: Turn this setting on or off for each camera. You must also select the audio channel that is associated with each camera. The Audio Out connections are located on the back panel of the DX4000.

•Live Audio Setup: Turn this setting on to listen to audio while live video is being displayed. You must select the monitoring channel

(1 through 4) and the network audio capabilities. One-way audio indicates that the DX4000 can send audio signals to the remote agent on a computer, but it cannot receive audio signals from the remote agent. With two-way audio the remote agent can send audio to a speaker that is connected through the DX4000.

20	C2602M-C (3/07)

Image 20

Contents DX4000 Digital Video Recorder Page Contents Page List of Figures List of Tables Regulatory Notices Radio and Television InterferenceDescription Features ModelsConnecting Devices to the DX4000 Overview of the SystemT u ~í ~â DX4000 ControlsControls on the Front Panel of the DX4000 Video Control Buttons on the Front Panel of the DX4000 Control Buttons on the Front PanelOperating the DX4000 from the Remote Control U ~í ~âTo start the DX4000 Before You BeginStarting and Stopping the DX4000 Choosing a User Account To stop the DX4000Main Window Overview Changing the Information Displayed on the Monitor Changing the Display ModeTo change the screen sequencing mode Adjusting Menu Settings Display MenuRecord Menu Camera Menu Audio MenuAlarm Menu Use the Alarm menu to set up alarms and relays for camerasSystem Menu System MenuChanging Passwords Password MenuResetting Passwords To reset the passwordsFactory Default Settings Factory Default Reset Warning MessageScreen View Selection Screen Rotation ModeChanging the Screen Layout PAN, TILT, and Zoom Controls Adjusting the Focus or Iris on a CameraControlling Cameras from the DX4000 Working with Presets To create a presetTo run a preset To run a predefined presetWorking with Patterns Using PresetTo set up a pattern To run a pattern Modifying Camera SettingsTo modify camera settings C2602M-C 3/07 Modifying Audio Settings To modify audio recording settingsTo modify live audio settings Modifying Image Recording Settings To modify image recording settingsTo modify relay outputs Modifying Alarms and RelaysTo modify alarm inputs C2602M-C 3/07 Setting UP a Recording Schedule Creating Recording SchedulesC2602M-C 3/07 Setting UP Motion Detection Recording Motion Detection Setup MenuC2602M-C 3/07 Setting UP ALARM-BASED Recording C2602M-C 3/07 Monitoring Live Video To change the screen modeTo view a specific video channel in single mode Working with Recorded Video Searching for VideoTimeline Showing Available Recorded Video C2602M-C 3/07 Playing Recorded Video Backing UP VideoTo back up video Missing Media Warning Message Overview of the Main Screen Working with the Remote Agent ApplicationAbout the Remote Agent Remote Agent Control Buttons Starting and Stopping the Remote AgentTo start the remote agent To stop the remote agentTo create a network connection for the DX4000 Configuring the Remote AgentTo configure optional settings on the remote agent Configuring the DX4000 from the Remote Agent Configuring the DX4000 from the Remote AgentTo set up recording schedules Recording SettingsTo set up recording quality Appears and the Remote Agent tab is displayed To set up alarm recordingTo set up motion detection C2602M-C 3/07 Camera Settings To configure camerasTo set up live audio Audio SettingsTo set up audio recording Alarm Settings To set up alarm inputs and relay outputsTo review system information System SettingsTo configure buzzer sounds To disconnect remote agent connections To modify passwordsTo configure the disk write mode To control PTZ cameras Controlling Cameras from the Remote AgentTo set the network speed Look for the Iris button on the PTZ controls To adjust the focusTo adjust the iris To set up a preset Completing the Setup for a PatternTo use Preset Using PresetTo listen to or disable audio Monitoring Live Video from the Remote AgentCapturing Live Video from the Remote Client Controlling AudioWorking with Recorded Video on the Remote Agent Searching for Recorded VideoTo search by date or time Click the Log button . The Search Log screen appearsClick the Search Events button Backing UP VideoTo search by event To save a snapshot Save as... dialog box appearsTo print a snapshot Print screen appearsViewing Video with the Backup Player Click the Open file button. The following screen appears To view recorded video with the backup playerTo authenticate recorded video with the backup player About the Web Client Starting the WEB ClientClick the Connect button . The Login dialog box appears Monitoring Video with the Web ClientC2602M-C 3/07 Product Warranty and Return Information ISO9001

Related manuals

Manual 36 pages 44.82 Kb

Manual 74 pages 2.6 Kb