Pelco dx4000 manual Setting UP ALARM-BASED Recording, Record Menu

Page 41

Figure 47. Saving Motion Detection Settings

6.Select an option as follows, and then press the Enter button.

•Select All: Enables motion detection for the entire screen.

•Deselect All: Disables motion detection for the entire screen.

•Save & Exit: Saves the motion detection regions as you have set them up.

•Cancel: Removes all new selections and retains the current motion detection regions.

7.Repeat these steps for each remaining camera.

8.Press the Return button until all menus are cleared. A message appears stating that the settings are being saved. The settings take effect immediately.

SETTING UP ALARM-BASED RECORDING

Setting up alarm-based recording is similar to setting up a recording schedule. You must first turn on the recording for a particular camera, and then you must choose a start and stop time. For alarm-based recording to take effect, you must connect alarms to the DX4000 and associate them with the correct camera. Refer to installation manual for information about connecting alarms to the unit.

1. From the main menu on the DX4000, select the Record menu option. The Record menu appears.

Figure 48. Record Menu

2.Press the down arrow button to move to the Alarm Recording Setup menu option, and then press the Enter button. The Alarm Recording Setup menu appears.

C2602M-C (3/07)

41

Image 41

Contents DX4000 Digital Video Recorder Page Contents Page List of Figures List of Tables Radio and Television Interference Regulatory NoticesDescription Models FeaturesOverview of the System Connecting Devices to the DX4000T u ~í ~â DX4000 ControlsControls on the Front Panel of the DX4000 Control Buttons on the Front Panel Video Control Buttons on the Front Panel of the DX4000U ~í ~â Operating the DX4000 from the Remote ControlTo start the DX4000 Before You BeginStarting and Stopping the DX4000 To stop the DX4000 Choosing a User AccountMain Window Overview Changing the Information Displayed on the Monitor Changing the Display ModeTo change the screen sequencing mode Display Menu Adjusting Menu SettingsRecord Menu Audio Menu Camera MenuUse the Alarm menu to set up alarms and relays for cameras Alarm MenuSystem Menu System MenuPassword Menu Changing PasswordsTo reset the passwords Resetting PasswordsFactory Default Reset Warning Message Factory Default SettingsScreen View Selection Screen Rotation ModeChanging the Screen Layout PAN, TILT, and Zoom Controls Adjusting the Focus or Iris on a CameraControlling Cameras from the DX4000 To create a preset Working with PresetsTo run a preset To run a predefined presetWorking with Patterns Using PresetTo set up a pattern To run a pattern Modifying Camera SettingsTo modify camera settings C2602M-C 3/07 To modify audio recording settings Modifying Audio SettingsTo modify live audio settings To modify image recording settings Modifying Image Recording SettingsTo modify relay outputs Modifying Alarms and RelaysTo modify alarm inputs C2602M-C 3/07 Creating Recording Schedules Setting UP a Recording Schedule C2602M-C 3/07 Motion Detection Setup Menu Setting UP Motion Detection RecordingC2602M-C 3/07 Setting UP ALARM-BASED Recording C2602M-C 3/07 Monitoring Live Video To change the screen modeTo view a specific video channel in single mode Searching for Video Working with Recorded VideoTimeline Showing Available Recorded Video C2602M-C 3/07 Backing UP Video Playing Recorded VideoTo back up video Missing Media Warning Message Overview of the Main Screen Working with the Remote Agent ApplicationAbout the Remote Agent Starting and Stopping the Remote Agent Remote Agent Control ButtonsTo start the remote agent To stop the remote agentTo create a network connection for the DX4000 Configuring the Remote AgentTo configure optional settings on the remote agent Configuring the DX4000 from the Remote Agent Configuring the DX4000 from the Remote AgentTo set up recording schedules Recording SettingsTo set up recording quality Appears and the Remote Agent tab is displayed To set up alarm recordingTo set up motion detection C2602M-C 3/07 To configure cameras Camera SettingsTo set up live audio Audio SettingsTo set up audio recording To set up alarm inputs and relay outputs Alarm SettingsTo review system information System SettingsTo configure buzzer sounds To disconnect remote agent connections To modify passwordsTo configure the disk write mode To control PTZ cameras Controlling Cameras from the Remote AgentTo set the network speed Look for the Iris button on the PTZ controls To adjust the focusTo adjust the iris Completing the Setup for a Pattern To set up a presetUsing Preset To use PresetMonitoring Live Video from the Remote Agent To listen to or disable audioCapturing Live Video from the Remote Client Controlling AudioSearching for Recorded Video Working with Recorded Video on the Remote AgentClick the Log button . The Search Log screen appears To search by date or timeClick the Search Events button Backing UP VideoTo search by event Save as... dialog box appears To save a snapshotPrint screen appears To print a snapshotViewing Video with the Backup Player Click the Open file button. The following screen appears To view recorded video with the backup playerTo authenticate recorded video with the backup player Starting the WEB Client About the Web ClientMonitoring Video with the Web Client Click the Connect button . The Login dialog box appearsC2602M-C 3/07 Product Warranty and Return Information ISO9001

Related manuals

Manual 36 pages 44.82 Kb

Manual 74 pages 2.6 Kb