Pelco dx4000 manual Creating Recording Schedules, Setting UP a Recording Schedule

Page 37

Creating Recording Schedules

By default, the DX4000 is set up for continuous recording. You can set up a schedule to record video only at certain times or to record video in response to motion or alarms.

WARNING: If you set up a recording schedule and also set up motion detection, the DX4000 will record video during the scheduled hours only when motion is detected.

SETTING UP A RECORDING SCHEDULE

1. From the main menu on the DX4000, select the Record menu option. The Record menu appears.

Figure 39. Record Menu

2.Press the down arrow button to move to the Timer Recording Setup menu option, and then press the Enter button. The Timer Recording Setup menu appears.

Figure 40. Timer Recording Setup Menu

3.Press the up or down arrow buttons to select the Record field for a camera, and then press the Enter button to access the setting.

4.Press the up or down arrow buttons to turn the setting on or off, and then press the Enter button to accept the setting.

5.Move to the Mode field and select the recording schedule. Choices are Daily or Weekly.

C2602M-C (3/07)

37

Image 37
Contents DX4000 Digital Video Recorder Page Contents Page List of Figures List of Tables Radio and Television Interference Regulatory NoticesDescription Models FeaturesOverview of the System Connecting Devices to the DX4000Controls on the Front Panel of the DX4000 DX4000 ControlsT u ~í ~â Control Buttons on the Front Panel Video Control Buttons on the Front Panel of the DX4000U ~í ~â Operating the DX4000 from the Remote ControlStarting and Stopping the DX4000 Before You BeginTo start the DX4000 To stop the DX4000 Choosing a User AccountMain Window Overview To change the screen sequencing mode Changing the Display ModeChanging the Information Displayed on the Monitor Display Menu Adjusting Menu SettingsRecord Menu Audio Menu Camera MenuUse the Alarm menu to set up alarms and relays for cameras Alarm MenuSystem Menu System MenuPassword Menu Changing PasswordsTo reset the passwords Resetting PasswordsFactory Default Reset Warning Message Factory Default SettingsChanging the Screen Layout Screen Rotation ModeScreen View Selection Controlling Cameras from the DX4000 Adjusting the Focus or Iris on a CameraPAN, TILT, and Zoom Controls To create a preset Working with PresetsTo run a preset To run a predefined presetTo set up a pattern Using PresetWorking with Patterns To modify camera settings Modifying Camera SettingsTo run a pattern C2602M-C 3/07 To modify audio recording settings Modifying Audio SettingsTo modify live audio settings To modify image recording settings Modifying Image Recording SettingsTo modify alarm inputs Modifying Alarms and RelaysTo modify relay outputs C2602M-C 3/07 Creating Recording Schedules Setting UP a Recording ScheduleC2602M-C 3/07 Motion Detection Setup Menu Setting UP Motion Detection RecordingC2602M-C 3/07 Setting UP ALARM-BASED Recording C2602M-C 3/07 To view a specific video channel in single mode To change the screen modeMonitoring Live Video Searching for Video Working with Recorded VideoTimeline Showing Available Recorded Video C2602M-C 3/07 Backing UP Video Playing Recorded VideoTo back up video Missing Media Warning Message About the Remote Agent Working with the Remote Agent ApplicationOverview of the Main Screen Starting and Stopping the Remote Agent Remote Agent Control ButtonsTo start the remote agent To stop the remote agentTo configure optional settings on the remote agent Configuring the Remote AgentTo create a network connection for the DX4000 Configuring the DX4000 from the Remote Agent Configuring the DX4000 from the Remote AgentTo set up recording quality Recording SettingsTo set up recording schedules To set up motion detection To set up alarm recordingAppears and the Remote Agent tab is displayed C2602M-C 3/07 To configure cameras Camera SettingsTo set up audio recording Audio SettingsTo set up live audio To set up alarm inputs and relay outputs Alarm SettingsTo configure buzzer sounds System SettingsTo review system information To configure the disk write mode To modify passwordsTo disconnect remote agent connections To set the network speed Controlling Cameras from the Remote AgentTo control PTZ cameras To adjust the iris To adjust the focusLook for the Iris button on the PTZ controls Completing the Setup for a Pattern To set up a presetUsing Preset To use PresetMonitoring Live Video from the Remote Agent To listen to or disable audioCapturing Live Video from the Remote Client Controlling AudioSearching for Recorded Video Working with Recorded Video on the Remote AgentClick the Log button . The Search Log screen appears To search by date or timeTo search by event Backing UP VideoClick the Search Events button Save as... dialog box appears To save a snapshotPrint screen appears To print a snapshotViewing Video with the Backup Player To authenticate recorded video with the backup player To view recorded video with the backup playerClick the Open file button. The following screen appears Starting the WEB Client About the Web ClientMonitoring Video with the Web Client Click the Connect button . The Login dialog box appearsC2602M-C 3/07 Product Warranty and Return Information ISO9001
Related manuals
Manual 36 pages 44.82 Kb Manual 74 pages 2.6 Kb