Pelco dx4000, C2602M-a manual Adjusting Menu Settings, Display Menu

Page 16

ADJUSTING MENU SETTINGS

Figure 11. Main Menu

To access menus on the DX4000 press the Menu button on the front panel of the unit or on the remote control. Each menu contains settings related to a different function on the DX4000. The menus are described below.

DISPLAY MENU

Figure 12. Display Menu

Use the Display menu to change the information that is displayed on the monitor as you view video.

•Date/Time: Turn this setting on to display the date and time on the video panes. The setting affects all video panes.

•Title: Turn this setting on to display the camera title if it exists. The setting affects all cameras connected to the DX4000. To set up a title, use the Camera menu.

•Status: Turn this setting on to display the recording status of the video. A red box means that video is recording. A green box means that video buffered before an event-based recording is being recorded.

•Border Color: Select the border color for each video panel. Choices are White, Blue, Red, Yellow, Green, and Gray.

•Sequence Dwell: Select the interval that each video will be displayed before the DX4000 switches to the next video in a rotation. This setting is used when you display video in a full screen and rotate between all attached cameras. Sequence dwell time can be between 1 and 60 seconds.

•Spot-Out Dwell: Select the interval that video will be routed to the spot monitor from the camera. Spot-out dwell time can be between 1 and 60 seconds.

•Deinterlace Mode: Turn this setting on to remove the screen spread if you are recording at a high resolution (704 x 480) and a low frame rate.

16	C2602M-A (6/06)

Image 16

Contents DX4000 Digital Video Recorder Contents C2602M-A 6/06 List of Figures List of Tables Description Features ModelsConnecting Devices to the DX4000 Overview of the SystemDX4000 Controls Controls on the Front Panel of the DX4000Video Control Buttons on the Front Panel of the DX4000 Control Buttons on the Front PanelOperating the DX4000 from the Remote Control Starting and Stopping the DX4000 Before You BeginTo start the DX4000 Choosing a User Account To stop the DX4000Main Window Overview To change the screen sequencing mode Changing the Display ModeChanging the Information Displayed on the Monitor Adjusting Menu Settings Display MenuRecord Menu Camera Menu Audio MenuAlarm Menu Use the Alarm menu to set up alarms and relays for camerasSystem Menu System MenuBackup Menu Back UP MenuChanging Passwords Password MenuResetting Passwords To reset the passwordsFactory Default Settings Factory Default Reset Warning MessageChanging the Screen Layout Screen Rotation ModeScreen View Selection Controlling Cameras from the DX4000 Adjusting the Focus or Iris on a CameraPAN, Tilt and Zoom Controls Working with Presets To create a presetTo run a preset To run a predeﬁned presetTo set up a pattern Using PresetWorking with Patterns To modify camera settings Modifying Camera SettingsTo run a pattern C2602M-A 6/06 Modifying Audio Settings To modify audio recording settingsTo modify live audio settings Modifying Image Recording Settings To modify image recording settingsModifying Alarms and Relays To modify alarm inputsTo modify relay outputs Setting UP a Recording Schedule Creating Recording SchedulesC2602M-A 6/06 Setting UP Motion Detection Recording Motion Detection Setup MenuC2602M-A 6/06 Setting UP ALARM-BASED Recording C2602M-A 6/06 To view a speciﬁc video channel in single mode To change the screen modeMonitoring Live Video Working With Recorded Video Searching for VideoTimeline Showing Available Recorded Video C2602M-A 6/06 Backing UP Video Playing Recorded VideoTo back up video Missing Media Warning Message About the Remote Agent Working With the Remote Agent ApplicationOverview of the Main Screen Remote Agent Control Buttons Starting and Stopping the Remote AgentTo start the remote agent To stop the remote agentConfiguring the Remote Agent To create a network connection for the DX4000Configuring the DX4000 from the Remote Agent To conﬁgure optional settings on the remote agentRecording Settings To set up recording qualityTo set up recording schedules Timer Recording Setup ScreenTo set up alarm recording To set up motion detectionC2602M-A 6/06 Camera Settings To conﬁgure camerasAudio Settings To set up audio recordingAlarm Settings To set up live audioSystem Settings To set up alarm inputs and relay outputsTo review system information To modify passwordsTo conﬁgure buzzer sounds To disconnect remote agent connections To conﬁgure the disk write modeTo set the network speed Controlling Cameras from the Remote Agent To adjust the focusTo control PTZ cameras To listen to or disable audio Monitoring Live Video from the Remote AgentCapturing Live Video from the Remote Client Controlling AudioSearching for Recorded Video Working with Recorded Video on the Remote AgentUse the following buttons to review the recorded video To search by date or time Click the Log button . The Search Log screen appearsTo search by event Event Viewer ScreenRemote Agent Backup Screen Backing UP VideoTo save a snapshot To print a snapshotSave as... dialog box appears Print screen appearsViewing Video with the Backup Player To authenticate recorded video with the backup player To view recorded video with the backup playerClick the Open ﬁle button. The following screen appears About the Web Client Starting the WEB ClientClick the Connect button . The Login dialog box appears Monitoring Video with the Web ClientProduct Warranty and Return Information ISO9001

Related manuals

Manual 74 pages 2.69 Kb

Manual 36 pages 44.82 Kb

Manual 78 pages 11.82 Kb