Pelco dx4000, C2602M-a manual Factory Default Settings, Factory Default Reset Warning Message

Page 24

FACTORY DEFAULT SETTINGS

You can restore the DX4000 to its original factory settings. Restoring the unit to its original factory settings resets all settings. It does not erase any recorded video from the hard disk drive, nor does it reformat the drive.

1.Press the Menu button on the front panel of the DX4000 or on the remote control.

2.From the main menu, navigate to the System menu, and then select Factory Default. The Factory Default menu appears.

Figure 21. Factory Default Menu

3.Press the Enter button and a warning message appears on the screen. You can select OK and then press the Enter button to reset the unit to its original factory settings. If you do not want to restore the settings, select Cancel, and then press the Enter button to keep the current settings.

Figure 22. Factory Default Reset Warning Message

24	C2602M-A (6/06)

Image 24

Contents DX4000 Digital Video Recorder Contents C2602M-A 6/06 List of Figures List of Tables Description Features ModelsConnecting Devices to the DX4000 Overview of the SystemDX4000 Controls Controls on the Front Panel of the DX4000Video Control Buttons on the Front Panel of the DX4000 Control Buttons on the Front PanelOperating the DX4000 from the Remote Control Before You Begin Starting and Stopping the DX4000To start the DX4000 Choosing a User Account To stop the DX4000Main Window Overview Changing the Display Mode To change the screen sequencing modeChanging the Information Displayed on the Monitor Adjusting Menu Settings Display MenuRecord Menu Camera Menu Audio MenuAlarm Menu Use the Alarm menu to set up alarms and relays for camerasSystem Menu System MenuBackup Menu Back UP MenuChanging Passwords Password MenuResetting Passwords To reset the passwordsFactory Default Settings Factory Default Reset Warning MessageScreen Rotation Mode Changing the Screen LayoutScreen View Selection Adjusting the Focus or Iris on a Camera Controlling Cameras from the DX4000PAN, Tilt and Zoom Controls Working with Presets To create a presetTo run a preset To run a predeﬁned presetUsing Preset To set up a patternWorking with Patterns Modifying Camera Settings To modify camera settingsTo run a pattern C2602M-A 6/06 Modifying Audio Settings To modify audio recording settingsTo modify live audio settings Modifying Image Recording Settings To modify image recording settingsModifying Alarms and Relays To modify alarm inputsTo modify relay outputs Setting UP a Recording Schedule Creating Recording SchedulesC2602M-A 6/06 Setting UP Motion Detection Recording Motion Detection Setup MenuC2602M-A 6/06 Setting UP ALARM-BASED Recording C2602M-A 6/06 To change the screen mode To view a speciﬁc video channel in single modeMonitoring Live Video Working With Recorded Video Searching for VideoTimeline Showing Available Recorded Video C2602M-A 6/06 Playing Recorded Video Backing UP VideoTo back up video Missing Media Warning Message Working With the Remote Agent Application About the Remote AgentOverview of the Main Screen Remote Agent Control Buttons Starting and Stopping the Remote AgentTo start the remote agent To stop the remote agentConfiguring the Remote Agent To create a network connection for the DX4000Configuring the DX4000 from the Remote Agent To conﬁgure optional settings on the remote agentRecording Settings To set up recording qualityTo set up recording schedules Timer Recording Setup ScreenTo set up alarm recording To set up motion detectionC2602M-A 6/06 Camera Settings To conﬁgure camerasAudio Settings To set up audio recordingAlarm Settings To set up live audioSystem Settings To set up alarm inputs and relay outputsTo modify passwords To review system informationTo conﬁgure buzzer sounds To conﬁgure the disk write mode To disconnect remote agent connectionsTo set the network speed To adjust the focus Controlling Cameras from the Remote AgentTo control PTZ cameras To listen to or disable audio Monitoring Live Video from the Remote AgentCapturing Live Video from the Remote Client Controlling AudioWorking with Recorded Video on the Remote Agent Searching for Recorded VideoUse the following buttons to review the recorded video To search by date or time Click the Log button . The Search Log screen appearsTo search by event Event Viewer ScreenRemote Agent Backup Screen Backing UP VideoTo save a snapshot To print a snapshotSave as... dialog box appears Print screen appearsViewing Video with the Backup Player To view recorded video with the backup player To authenticate recorded video with the backup playerClick the Open ﬁle button. The following screen appears About the Web Client Starting the WEB ClientClick the Connect button . The Login dialog box appears Monitoring Video with the Web ClientProduct Warranty and Return Information ISO9001

Related manuals

Manual 74 pages 2.69 Kb

Manual 36 pages 44.82 Kb

Manual 78 pages 11.82 Kb