Pelco dx4000, C2602M-a manual C2602M-A 6/06

Page 30

Figure 30. Status/Title Setup Menu

4. Select Covert/PTZ Setup from the Camera menu, and then press the Enter button. The Covert/PTZ Setup menu appears.

Figure 31. Covert/PTZ Setup Menu

5.For each camera, set up the following settings:

•Covert: Turn this setting on or off. If a camera is set as covert, the DX4000 records its video but does not display it.

•Address: Select the PTZ address in use by each camera. Valid addresses are 0 through 255. Refer to the operation manual for your camera to determine its PTZ address.

•PTZ Protocol: Select the PTZ protocol in use by each camera. Several protocols are available. Refer to the operation manual for your camera to determine its PTZ protocol (for example, Pelco D or Pelco P).

6.Move to the Baud Rate ﬁeld and select the rate at which PTZ cameras will communicate with the DX4000. The default rate is 9600 BPS. Available baud rates range from 2400 BPS to 34800 BPS.

7.Press the Return button after you have completed setting up covert and PTZ settings.

8.Select Color Setup from the Camera menu, and then press the Enter button. The Color Setup menu appears.

30	C2602M-A (6/06)

Image 30

Contents DX4000 Digital Video Recorder Contents C2602M-A 6/06 List of Figures List of Tables Description Features ModelsConnecting Devices to the DX4000 Overview of the SystemDX4000 Controls Controls on the Front Panel of the DX4000Video Control Buttons on the Front Panel of the DX4000 Control Buttons on the Front PanelOperating the DX4000 from the Remote Control Before You Begin Starting and Stopping the DX4000To start the DX4000 Choosing a User Account To stop the DX4000Main Window Overview Changing the Display Mode To change the screen sequencing modeChanging the Information Displayed on the Monitor Adjusting Menu Settings Display MenuRecord Menu Camera Menu Audio MenuAlarm Menu Use the Alarm menu to set up alarms and relays for camerasSystem Menu System MenuBackup Menu Back UP MenuChanging Passwords Password MenuResetting Passwords To reset the passwordsFactory Default Settings Factory Default Reset Warning MessageScreen Rotation Mode Changing the Screen LayoutScreen View Selection Adjusting the Focus or Iris on a Camera Controlling Cameras from the DX4000PAN, Tilt and Zoom Controls To run a preset Working with PresetsTo create a preset To run a predeﬁned presetUsing Preset To set up a patternWorking with Patterns Modifying Camera Settings To modify camera settingsTo run a pattern C2602M-A 6/06 Modifying Audio Settings To modify audio recording settingsTo modify live audio settings Modifying Image Recording Settings To modify image recording settingsModifying Alarms and Relays To modify alarm inputsTo modify relay outputs Setting UP a Recording Schedule Creating Recording SchedulesC2602M-A 6/06 Setting UP Motion Detection Recording Motion Detection Setup MenuC2602M-A 6/06 Setting UP ALARM-BASED Recording C2602M-A 6/06 To change the screen mode To view a speciﬁc video channel in single modeMonitoring Live Video Working With Recorded Video Searching for VideoTimeline Showing Available Recorded Video C2602M-A 6/06 Playing Recorded Video Backing UP VideoTo back up video Missing Media Warning Message Working With the Remote Agent Application About the Remote AgentOverview of the Main Screen To start the remote agent Remote Agent Control ButtonsStarting and Stopping the Remote Agent To stop the remote agentConfiguring the Remote Agent To create a network connection for the DX4000Configuring the DX4000 from the Remote Agent To conﬁgure optional settings on the remote agentRecording Settings To set up recording qualityTo set up recording schedules Timer Recording Setup ScreenTo set up alarm recording To set up motion detectionC2602M-A 6/06 Camera Settings To conﬁgure camerasAudio Settings To set up audio recordingAlarm Settings To set up live audioSystem Settings To set up alarm inputs and relay outputsTo modify passwords To review system informationTo conﬁgure buzzer sounds To conﬁgure the disk write mode To disconnect remote agent connectionsTo set the network speed To adjust the focus Controlling Cameras from the Remote AgentTo control PTZ cameras Capturing Live Video from the Remote Client To listen to or disable audioMonitoring Live Video from the Remote Agent Controlling AudioWorking with Recorded Video on the Remote Agent Searching for Recorded VideoUse the following buttons to review the recorded video To search by date or time Click the Log button . The Search Log screen appearsTo search by event Event Viewer ScreenRemote Agent Backup Screen Backing UP VideoSave as... dialog box appears To save a snapshotTo print a snapshot Print screen appearsViewing Video with the Backup Player To view recorded video with the backup player To authenticate recorded video with the backup playerClick the Open ﬁle button. The following screen appears About the Web Client Starting the WEB ClientClick the Connect button . The Login dialog box appears Monitoring Video with the Web ClientProduct Warranty and Return Information ISO9001

Related manuals

Manual 74 pages 2.69 Kb

Manual 36 pages 44.82 Kb

Manual 78 pages 11.82 Kb