Pelco dx4000, C2602M-a manual Timeline Showing Available Recorded Video

Page 44

Figure 54. Searching by Date and Time

The screen expands to include a 24-hour timeline for the selected date. Hours for which there is recorded video are gray. Hours for which no video is recorded are blank.

Figure 55. Timeline Showing Available Recorded Video

4.Press the right or left arrow buttons on the front panel of the DX4000 to move to the time that you want to view. The cursor moves in

15-minute increments. When searching for video recorded during Daylight Saving Time, make a note of the following exceptions:

•When the time is set back an hour, there will be two sets of video available for the 1:00 A.M. hour. You must select a time before 1:00 A.M. to search for both hours’ worth of video.

•When the time is set forward an hour, there will be no video recorded between 2:00 A.M. and 3:00 A.M.

5.Press the Enter button after you have selected a time. The video is displayed on the monitor in four-channel mode. Each video pane contains recorded video from a specific camera. A play button appears in the lower right video pane.

Figure 56. Results When Searching for Video by Date

6. Refer to Playing Recorded Video on page 46 for instructions on playing back video.

44

C2602M-A (6/06)

Page 43 Page 45
Image 44
Page 43 Page 45
Contents DX4000 Digital Video Recorder Contents C2602M-A 6/06 List of Figures List of Tables Description Features ModelsConnecting Devices to the DX4000 Overview of the SystemDX4000 Controls Controls on the Front Panel of the DX4000Video Control Buttons on the Front Panel of the DX4000 Control Buttons on the Front PanelOperating the DX4000 from the Remote Control To start the DX4000 Before You BeginStarting and Stopping the DX4000 Choosing a User Account To stop the DX4000Main Window Overview Changing the Information Displayed on the Monitor Changing the Display ModeTo change the screen sequencing mode Adjusting Menu Settings Display MenuRecord Menu Camera Menu Audio MenuAlarm Menu Use the Alarm menu to set up alarms and relays for camerasSystem Menu System MenuBackup Menu Back UP MenuChanging Passwords Password MenuResetting Passwords To reset the passwordsFactory Default Settings Factory Default Reset Warning MessageScreen View Selection Screen Rotation ModeChanging the Screen Layout PAN, Tilt and Zoom Controls Adjusting the Focus or Iris on a CameraControlling Cameras from the DX4000 Working with Presets To create a presetTo run a preset To run a predefined presetWorking with Patterns Using PresetTo set up a pattern To run a pattern Modifying Camera SettingsTo modify camera settings C2602M-A 6/06 Modifying Audio Settings To modify audio recording settingsTo modify live audio settings Modifying Image Recording Settings To modify image recording settingsModifying Alarms and Relays To modify alarm inputsTo modify relay outputs Setting UP a Recording Schedule Creating Recording SchedulesC2602M-A 6/06 Setting UP Motion Detection Recording Motion Detection Setup MenuC2602M-A 6/06 Setting UP ALARM-BASED Recording C2602M-A 6/06 Monitoring Live Video To change the screen modeTo view a specific video channel in single mode Working With Recorded Video Searching for VideoTimeline Showing Available Recorded Video C2602M-A 6/06 To back up video Playing Recorded VideoBacking UP Video Missing Media Warning Message Overview of the Main Screen Working With the Remote Agent ApplicationAbout the Remote Agent Remote Agent Control Buttons Starting and Stopping the Remote AgentTo start the remote agent To stop the remote agentConfiguring the Remote Agent To create a network connection for the DX4000Configuring the DX4000 from the Remote Agent To configure optional settings on the remote agentRecording Settings To set up recording qualityTo set up recording schedules Timer Recording Setup ScreenTo set up alarm recording To set up motion detectionC2602M-A 6/06 Camera Settings To configure camerasAudio Settings To set up audio recordingAlarm Settings To set up live audioSystem Settings To set up alarm inputs and relay outputsTo configure buzzer sounds To modify passwordsTo review system information To set the network speed To configure the disk write modeTo disconnect remote agent connections To control PTZ cameras To adjust the focusControlling Cameras from the Remote Agent To listen to or disable audio Monitoring Live Video from the Remote AgentCapturing Live Video from the Remote Client Controlling AudioUse the following buttons to review the recorded video Working with Recorded Video on the Remote AgentSearching for Recorded Video To search by date or time Click the Log button . The Search Log screen appearsTo search by event Event Viewer ScreenRemote Agent Backup Screen Backing UP VideoTo save a snapshot To print a snapshotSave as... dialog box appears Print screen appearsViewing Video with the Backup Player Click the Open file button. The following screen appears To view recorded video with the backup playerTo authenticate recorded video with the backup player About the Web Client Starting the WEB ClientClick the Connect button . The Login dialog box appears Monitoring Video with the Web ClientProduct Warranty and Return Information ISO9001
Related manuals
Manual 74 pages 2.69 Kb Manual 36 pages 44.82 Kb Manual 78 pages 11.82 Kb
Top Page Image Contents