Pelco C2602M-a, dx4000 Alarm Menu, Use the Alarm menu to set up alarms and relays for cameras

Page 19

ALARM MENU

Figure 16. Alarm Menu

Use the Alarm menu to set up alarms and relays for cameras.

Alarm Input Setup: Use this option to connect or disconnect alarms for any camera at any time. If you connect an alarm, you must associate it with a camera and select the alarm type - normally closed (N/C) or normally open (N/O).

Relay Output Setup: Use this option to set up a relay in response to alarms. For each alarm, you can enable or disable the relay, select whether the relay mode is latched or transparent, and set the delay time.

A latched relay continues operating for the duration set for it even if an alarm is received but the alarm sensor stops working. A transparent relay stops working if the alarm sensor stops working after it receives an alarm.

Duration refers to either the delay between the occurrence of an alarm and the time at which a relay starts or the length of time that the relay remains in effect after the alarm occurs. Duration times can be increased by 5- or 10-second increments for the first minute, and then by one- or two-minute increments for a maximum of five minutes. Duration may also be set to continue until an operator responds and turns off the alarm with a key (Until Key-In).

Relay Type: Use this option to indicate whether a relay is normally open (N/O) or normally closed (N/C).

C2602M-A (6/06)

19

Image 19
Contents DX4000 Digital Video Recorder Contents C2602M-A 6/06 List of Figures List of Tables Description Models FeaturesOverview of the System Connecting Devices to the DX4000Controls on the Front Panel of the DX4000 DX4000 ControlsControl Buttons on the Front Panel Video Control Buttons on the Front Panel of the DX4000Operating the DX4000 from the Remote Control Starting and Stopping the DX4000 Before You BeginTo start the DX4000 To stop the DX4000 Choosing a User AccountMain Window Overview To change the screen sequencing mode Changing the Display ModeChanging the Information Displayed on the Monitor Display Menu Adjusting Menu SettingsRecord Menu Audio Menu Camera MenuUse the Alarm menu to set up alarms and relays for cameras Alarm MenuSystem Menu System MenuBack UP Menu Backup MenuPassword Menu Changing PasswordsTo reset the passwords Resetting PasswordsFactory Default Reset Warning Message Factory Default SettingsChanging the Screen Layout Screen Rotation ModeScreen View Selection Controlling Cameras from the DX4000 Adjusting the Focus or Iris on a CameraPAN, Tilt and Zoom Controls To run a predefined preset Working with PresetsTo create a preset To run a presetTo set up a pattern Using PresetWorking with Patterns To modify camera settings Modifying Camera SettingsTo run a pattern C2602M-A 6/06 To modify audio recording settings Modifying Audio SettingsTo modify live audio settings To modify image recording settings Modifying Image Recording SettingsTo modify alarm inputs Modifying Alarms and RelaysTo modify relay outputs Creating Recording Schedules Setting UP a Recording ScheduleC2602M-A 6/06 Motion Detection Setup Menu Setting UP Motion Detection RecordingC2602M-A 6/06 Setting UP ALARM-BASED Recording C2602M-A 6/06 To view a specific video channel in single mode To change the screen modeMonitoring Live Video Searching for Video Working With Recorded VideoTimeline Showing Available Recorded Video C2602M-A 6/06 Backing UP Video Playing Recorded VideoTo back up video Missing Media Warning Message About the Remote Agent Working With the Remote Agent ApplicationOverview of the Main Screen To stop the remote agent Remote Agent Control ButtonsStarting and Stopping the Remote Agent To start the remote agentTo create a network connection for the DX4000 Configuring the Remote AgentTo configure optional settings on the remote agent Configuring the DX4000 from the Remote AgentTo set up recording quality Recording SettingsTimer Recording Setup Screen To set up recording schedulesTo set up motion detection To set up alarm recordingC2602M-A 6/06 To configure cameras Camera SettingsTo set up audio recording Audio SettingsTo set up live audio Alarm SettingsTo set up alarm inputs and relay outputs System SettingsTo review system information To modify passwordsTo configure buzzer sounds To disconnect remote agent connections To configure the disk write modeTo set the network speed Controlling Cameras from the Remote Agent To adjust the focusTo control PTZ cameras Controlling Audio To listen to or disable audioMonitoring Live Video from the Remote Agent Capturing Live Video from the Remote ClientSearching for Recorded Video Working with Recorded Video on the Remote AgentUse the following buttons to review the recorded video Click the Log button . The Search Log screen appears To search by date or timeEvent Viewer Screen To search by eventBacking UP Video Remote Agent Backup ScreenPrint screen appears To save a snapshotTo print a snapshot Save as... dialog box appearsViewing Video with the Backup Player To authenticate recorded video with the backup player To view recorded video with the backup playerClick the Open file button. The following screen appears Starting the WEB Client About the Web ClientMonitoring Video with the Web Client Click the Connect button . The Login dialog box appearsProduct Warranty and Return Information ISO9001
Related manuals
Manual 74 pages 2.69 Kb Manual 36 pages 44.82 Kb Manual 78 pages 11.82 Kb