Pelco dx4000, C2602M-a manual Alarm Settings, To set up live audio

Page 58

To set up live audio

1. From the remote agent application main screen, click the Setup button	if the Settings screen is not open. The Settings screen
appears and the Remote Agent tab is displayed.

2.Open the DVR System tab, and then click the Audio tab.

3.Under Live Audio, conﬁgure the following settings:

•Live Audio: Set this to On or Off. When set to On, the remote agent can receive live audio from cameras through the DX4000.

•Monitoring Channel: Select the audio channel that is connected to the camera. Refer to the back panel of the unit to verify the channel number.

•Audio Network: Select the type of audio the remote agent can receive. With one-way audio you can listen to the audio stream associated with a camera. With two-way audio the remote agent can send audio to a speaker that is connected through the DX4000. You might use this feature to allow an operator at a remote computer to communicate with a person waiting at a locked door or a similar situation. Audio transmitted from the remote agent is not recorded.

4.Click the Apply button to save the changes and continue to other settings. If you are ﬁnished updating settings, click the OK button to close the screen.

ALARM SETTINGS

Use the Alarm tab to set up alarms for the DX4000. A separate alarm input is available for each camera. Alarms can be normally open or normally closed. A single relay output is available for all of the cameras. This relay can be normally open or normally closed.

Figure 72. Conﬁguring Alarm Settings From the Remote Agent

58	C2602M-A (6/06)

Image 58

Contents DX4000 Digital Video Recorder Contents C2602M-A 6/06 List of Figures List of Tables Description Features ModelsConnecting Devices to the DX4000 Overview of the SystemDX4000 Controls Controls on the Front Panel of the DX4000Video Control Buttons on the Front Panel of the DX4000 Control Buttons on the Front PanelOperating the DX4000 from the Remote Control Starting and Stopping the DX4000 Before You BeginTo start the DX4000 Choosing a User Account To stop the DX4000Main Window Overview To change the screen sequencing mode Changing the Display ModeChanging the Information Displayed on the Monitor Adjusting Menu Settings Display MenuRecord Menu Camera Menu Audio MenuAlarm Menu Use the Alarm menu to set up alarms and relays for camerasSystem Menu System MenuBackup Menu Back UP MenuChanging Passwords Password MenuResetting Passwords To reset the passwordsFactory Default Settings Factory Default Reset Warning MessageChanging the Screen Layout Screen Rotation ModeScreen View Selection Controlling Cameras from the DX4000 Adjusting the Focus or Iris on a CameraPAN, Tilt and Zoom Controls To run a preset Working with PresetsTo create a preset To run a predeﬁned presetTo set up a pattern Using PresetWorking with Patterns To modify camera settings Modifying Camera SettingsTo run a pattern C2602M-A 6/06 Modifying Audio Settings To modify audio recording settingsTo modify live audio settings Modifying Image Recording Settings To modify image recording settingsModifying Alarms and Relays To modify alarm inputsTo modify relay outputs Setting UP a Recording Schedule Creating Recording SchedulesC2602M-A 6/06 Setting UP Motion Detection Recording Motion Detection Setup MenuC2602M-A 6/06 Setting UP ALARM-BASED Recording C2602M-A 6/06 To view a speciﬁc video channel in single mode To change the screen modeMonitoring Live Video Working With Recorded Video Searching for VideoTimeline Showing Available Recorded Video C2602M-A 6/06 Backing UP Video Playing Recorded VideoTo back up video Missing Media Warning Message About the Remote Agent Working With the Remote Agent ApplicationOverview of the Main Screen To start the remote agent Remote Agent Control ButtonsStarting and Stopping the Remote Agent To stop the remote agentConfiguring the Remote Agent To create a network connection for the DX4000Configuring the DX4000 from the Remote Agent To conﬁgure optional settings on the remote agentRecording Settings To set up recording qualityTo set up recording schedules Timer Recording Setup ScreenTo set up alarm recording To set up motion detectionC2602M-A 6/06 Camera Settings To conﬁgure camerasAudio Settings To set up audio recordingAlarm Settings To set up live audioSystem Settings To set up alarm inputs and relay outputsTo review system information To modify passwordsTo conﬁgure buzzer sounds To disconnect remote agent connections To conﬁgure the disk write modeTo set the network speed Controlling Cameras from the Remote Agent To adjust the focusTo control PTZ cameras Capturing Live Video from the Remote Client To listen to or disable audioMonitoring Live Video from the Remote Agent Controlling AudioSearching for Recorded Video Working with Recorded Video on the Remote AgentUse the following buttons to review the recorded video To search by date or time Click the Log button . The Search Log screen appearsTo search by event Event Viewer ScreenRemote Agent Backup Screen Backing UP VideoSave as... dialog box appears To save a snapshotTo print a snapshot Print screen appearsViewing Video with the Backup Player To authenticate recorded video with the backup player To view recorded video with the backup playerClick the Open ﬁle button. The following screen appears About the Web Client Starting the WEB ClientClick the Connect button . The Login dialog box appears Monitoring Video with the Web ClientProduct Warranty and Return Information ISO9001

Related manuals

Manual 74 pages 2.69 Kb

Manual 36 pages 44.82 Kb

Manual 78 pages 11.82 Kb