FUNAI BZV420MW8 owner manual To stop the timer recording in progress, Press Timer SET, Cleared

TIMER RECORDING

Checking, canceling, or correcting the timer programming information

1) Press [TIMER SET].

TIMER REC indicator will light off on the front panel.

2)Press [TIMER].

3)Check the information on the list you will need.

Timer Programming

JAN/ 2/07 12:00 AM E1 SP
SP (1:00)		MON JAN/01 11:00AM
Date	Start	End	E1/E2
JAN/02	12:00AM	1:00AM	E1
	New Program
			1/1

4-A) To delete the timer program:

1 Use [K / L] to select the program you want to delete, then press [OK].

2 Use [K / L] to select “Delete”, then press [OK].

Confirmation window will appear.

3 Use [K / L] to select “Yes”, then press [OK].

4-B) To correct the timer program:

1 Use [K / L] to select the program you want to correct, then press [OK].

2 Use [K / L] to select “Program Change”, then press [OK].

3 Correct the timer program by using [K / L / { / B], then press [OK].

5)Press [TIMER] to exit.

6)Press [TIMER SET] to return to the timer standby mode.

To stop the timer recording in progress

Press [STOP C] to stop the disc recording or

[STOP C/EJECT A] to stop the cassette tape recording on the front panel of the unit.

[STOP C] on the remote control is not effective.

Note

•Press [TIMER] to check the timer recording in progress. When the timer recording is proceeding, that program will be highlighted with red. In this case, you cannot select any other program.

If the timer program did not complete correctly, the error number appears in the timer pro- gramming list.

			Timer Programming
					TUE JAN/02 11:00AM
			Date	Start	End	E1/E2
		E41	JAN/02	12:00AM	1:00AM	E1
				New Program
						1/1
Each error number means:
E1-22	Recording error other				E41	Power failed
E37-39	than below
E24	Unrecordable disc				E42	No disc when
						recording
E25-26	Copy prohibited				E43	Already 49 titles
	program					recorded
E29	Disc protected				E44	Already 254 chapters
						recorded
E30	Disc full				E45	Copy prohibited
						program
E35	PCA full *1				E46	It is impossible to
E36	Already finalized					record additionally
						on a disc recorded
	video format disc
						by other units
E40	Some portion has
						when setting “
	not been recorded					Make Recording
	because of program					Compatible” to “OFF”.
	overlapping.
	Recording did not
	start at the start time.

•E23, E27, E28, E31, E32, E33 and E34 are not displayed.

•A program with the error number is grayed in the timer programming list.

•Once the timer programming list with error line(s) is displayed, or after canceling and setting again the timer standby mode, the program line(s) with error will be

cleared.

*1 PCA is a disc's space reserved for recording test.

Introduction Connections Basic Setup Recording Playback Editing Function Setup VCR Functions Others

Español

EN 27