FUNAI BZV420MW8 Maintenance Servicing, Cleaning the cabinet, Cleaning discs, Auto head cleaning

Page 7

PRECAUTIONS

Maintenance

Servicing

•Please refer to relevant topics on “TROUBLESHOOTING” on pages 80-84 before returning the product.

•If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center.

Cleaning the cabinet

•Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive.

Cleaning discs

•When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.

•Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.

Cleaning the disc lens

•If this unit still does not perform properly although you refer to the relevant sections and to “TROUBLESHOOTING” in this owner's manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

Disc handling

•Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

•Always store the disc in its protective case when it is not used.

Auto head cleaning

•Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.

•Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video heads after a long period of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your unit may need to be cleaned.

© 2007 Funai Electric Co., Ltd.

1.Please visit your local Audio/Video store and purchase a good quality VHS video head cleaner.

2.If a video head cleaner does not solve the problem, please consult your dealer or an Authorized Service Center.

Note

•Remember to read the instructions along with the video head cleaner before use.

•Clean video heads only when problems occur.

IR signal check

If the remote control does not work properly, you can test if the remote control sends out the infrared signal with AM radio or a digital camera (including built-in camera of cellular phone). It will help to define the cause of malfunction.

•With an AM radio:

Tune an AM radio to a station with no broadcasting. Press a button on remote control toward the radio. Sound will be fluttering when you press any key and the radio receives the signal. This means the remote control is working.

• With a digital camera (including built-in camera of cellular phone):

Direct a digital camera to remote control, press and hold a button on remote control. If infrared light appears through digital camera, the remote control is working.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Dolby Digital Recording

“Dolby® Digital Recording enables consumers to record high-quality video with stereo sound on recordable DVD discs. The technology, when utilized instead of PCM recording, also saves recordable disc space, allow- ing for higher video resolution or extended recording time on each DVD. DVDs created using Dolby Digital Recording will play back on all DVD-video players.” Note: This is true when the players are compatible with actual recordable DVD discs.

Introduction Connections Basic Setup Recording Playback Editing Function Setup VCR Functions

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.

EN 5

Others

Español

Page 6 Page 8
Image 7
Page 6 Page 8
Contents BZV420MW8 Press Setup to exit Plug in the power cords of the devices to the AC outletCompatible before being able to see those effects on other 6Press Stop C to stop recording 3Press REC Mode to select a recording modeLaser Safety PrecautionsMake your contribution to the environment Precautions Important SafeguardsMoisture Condensation Warning Installation LocationSupplied Accessories Avoid the Hazards of Electrical Shock and FireCleaning the disc lens Disc handling Maintenance ServicingCleaning the cabinet Cleaning discsContents Features Front Panel Functional Overview2423222120 19 14 13 12 11 10 9 8 Rear Panel Functional Overview10 9 8 7 6 5 4 3 Open the cover Insert batteries Remote ControlInstalling the Batteries in the Remote Control Using a Remote ControlVCR mode Timer SET button DVD/VCRTimer button DVD/VCR REW E button DVD/VCR DVD modeMake the connection as illustrated below Disconnect the power cords of the deConnection to AN External Tuner Om the AC outletPress Setup to exit Settings for the Video InputThis unit Connection to a TVConnection Dolby Digital SettingConnection to AN Audio System AudioVCR mode Thevcr / DVD Recorder SwitchingDisc Information / Menu On-Screen Display / MenuMain Menu Guide to ON-SCREEN Displays and MenusProceed to in Clock Setting on Initial SettingPress OK to activate Clock Setting.Initial Setup You can set the built-in calendar from the year 2007 up to Setting the ClockClock Setting Set the clock before you try the timer programmingUnrecordable Discs Recording ModeInformation on DVD Recording Recordable DiscsBefore Recording Setting for Auto ChapterMake Recording Compatible Press DVD Press REC Mode to select aRecording mode Press STANDBY-ON yPress Stop C to exit the title list Basic Recording & ONE-TOUCH Timer RecordingPress Timer Timer RecordingBefore recording, make sure Use K / L to select a recording Timer RecordingPress OK when all items are entered Press Timer SET to set a timer programmingPress Timer Check the information on the list you will need To stop the timer recording in progressPress Timer SET Timer REC indicator will light off on the front panelPriority of Overlapped Settings Hints for Timer RecordingUse K / L to select Satellite Link Satellite LinkThen press OK Use K / L to set the desired starting time, then press BPress OK To Standby Mode is highlightedPress Timer SET to turn on the unit Satellite LinkOverwriting in the Middle of the Title Overwriting Unnecessary TitleOverwriting from the Beginning TitleOverwrite recording a Existing title B Existing title C Overwriting Unnecessary TitleHints for Overwriting Overwrite recording a Existing title B After overwritingConnection to an External Device External Device RecordingExternal device It takes a while to load Disc Press REC Mode to select a recording modeExternal Device Recording Recording from an External DeviceTo cancel the disc protect Setting a Disc to ProtectUse K / L to select Yes, then press OK Finalizing is completed Press Setup Use K / L to select Disc Edit, then press OKFinalizing a Disc Use K / L to select Finalize, then press OKAuto Finalizing Playing the Discs in Other DVD PlayersUse K / L to select ON, then press OK Make sure Dubbing ModeUse K / L to select Recording, then press OK Use K / L to select Dubbing Mode, then press OKVCR to DVD DVD to VCR Dubbing ModePress D.DUBBING Press Stop C to stop the recordingInformation on Playback Direct Playback Basic PlaybackAlign the disc to the disc tray guide Basic PlaybackPlayback from the Title List Press OPEN/CLOSE a to close the disc trayPress OK Use K / L to select a desired titleTemporarily Use K / L to select Play, thenHints for audio CD tracks and MP3 files When selecting the folder Not available for audio CDPlaying Back an Audio CD and a CD-RW/-R with MP3 Files Follow steps 1 to 2 in Direct Playback onPlayback will be paused and sound will be muted Using the Title / Disc MenuPause Press DVD first During playback, press Pause FSkipping TV Commercials During Playback Special PlaybackResume Playback Fast Forward / Fast Reverse Playback16x Special PlaybackRapid Playback Step by Step PlaybackZoom Marker SettingTitle track number and the time will be displayed Title / Chapter Search Using Prev H / Next GUsing Display SearchTime Search SearchAudio CD Random Playback Repeat PlaybackRepeat this step until you program all the desired tracks Repeat / Random / Program PlaybackProgram Playback You can program the disc to play back in your desired orderSwitching Audio Soundtrack Switching SubtitlesFor DVD-video Audio soundtrack will switch Reducing Block Noise Switching Virtual Surround SystemSwitching Camera Angles Selecting the Format of Audio and VideoPress Title Information on Disc EditingGuide to a Title List Editing DiscsDeleting Titles Editing DiscsUse K / L to select Edit, then After this operation is completed, press Return to exit Editing DiscsPutting Names on Titles Use K / L to select Edit TitleSubmenu will appear Setting Chapter MarksUse K / L to select Add, then press OK Press Return twice to exitClearing Chapter Marks To delete all chapter marks Clearing Chapter Marks cont’dAll chapter marks will be deleted Hiding Chapters Press Return to exit Setting Pictures for ThumbnailsPicture for thumbnail will be set You can divide one title into 2 new titles Dividing a TitleTitle will be divided into 2 new titles Name, then press OK. e.g. DVD+RW When you finish entering a title name, pressPutting Name on Disc You can put a name on the disc and change it from this menuSetting or Releasing Disc Protect You can erase all titles on a disc Erasing DiscUse K / L to select Yes, then press Making Edits CompatibleSetup List of SettingsUse K / L to select Playback, then SetupsSetup to exit PlaybackPlayback cont’d SetupsParental Lock Default OFF Use the Number buttons to enter the current passwordDisc Audio Angle Icon Default on Disc Menu Language Default EnglishAudio Language Default Original Subtitle Language Default OFFDisplay Screen Saver Default 10 minutesUse K / L to select a desired item, then press OK When you finish with setting, press Setup to exitVideo Use K / L to select Video, then press OKTV Aspect Default 43 Letter Box Progressive Scan Default OFFVideo cont’d Reset the setting to default Reset AllPress VCR first Before recording, make sure Recording modeVCR Functions RecordingVCR Functions One-touch Timer Recording OTRYou cannot pause the one-touch timer recording Using REC I or Stop COther Operations Symptom Remedy TroubleshootingPress OPEN/CLOSE a TroubleshootingRepairing process MAY not work OPEN/CLOSE a to take out the disc. The disc canceled duringError message Cause Solution Frequently Asked Questions Language Code Language CodeGlossary Terminals SpecificationsGeneral RecordingDisco Grabable EspañolDiscos Reproducibles Códigos de RegiónPosición de la entrada externa Deseada, y luego presione OK Presione Setup y utilice K / LEspañol Utilice K / L para seleccionar laPara de tener la grabación presione Stop C Presione STANDBY-ON yPresione OK para activar Ajste Manual de Reloj Presione REC I para iniciar la grabaciónDetenga la Presione TimerConfigure una programación del temporizador Presione OK Abra la bandejaTel Customer Service1VMN24193
Top Page Image Contents