FUNAI BZV420MW8 owner manual Troubleshooting, Press OPEN/CLOSE a

	TROUBLESHOOTING
	Symptom	Remedy
	There is no picture.	• If the main menu appears on the TV screen, press [RETURN] to exit.
		• Check if the progressive scan mode is set correctly according to your TV
		(page 75).
	Picture noise appears.	• Clean the disc with a cleaning cloth.
	Playback picture from the external	• If the picture output signal from the external devices passes through
	devices connected to this unit is	this unit to get to your TV, the copy protection signal applied to some
	distorted.	DVD could affect the picture quality. Disconnect the playback device in
		question and connect it directly to your TV.
	There is no sound.	• If you are using DIGITAL AUDIO OUTPUT (COAXIAL) jack, check the setting
		in “Disc Audio” (page 71).
		• Clean the disc with a cleaning cloth.
	Sound is noisy.	• Clean the disc with a cleaning cloth.
	No DTS sound is output.	• This unit is not compatible with DTS sound.
	The disc does not play back.	• No disc is inserted.
		• A blank disc is inserted.
		• The disc is upside down. Insert the disc with the labeled side facing up.
		• The disc is not correctly inserted.
		• The unit cannot play back certain discs (such as a CD-ROM) (page 40).
		• The region code on the DVD-video does not match the unit (page 40).
		• Moisture has condensed inside the unit. Remove the disc and leave the
		unit turned on for about 2 hours until the moisture evaporates (page 4).
		• If the disc was recorded on another recorder, the unit cannot play back
D		the disc if it was not finalized.
	Discs recorded on this unit cannot be	• If you are using DVD+R, DVD-RW/-R disc, please ensure you finalized the
V
	played back on other DVD players.	disc after recording (page 36).
D	The disc does not start playback from	• Resume playback was activated (page 46). Press [STOP C] twice.
	the beginning.	• You have inserted a disc whose title menu or DVD menu automatically
		appears on the TV screen when it is first insert.
	The unit starts playing back the disc	• The DVD-video features an auto playback function.
	automatically.
	Some functions such as stop, search,	• Depending on the disc, you may not be able to do some of the
	or slow-motion playback cannot be	operations. Refer to the manual supplied with the disc.
	performed.
	The language for the sound track	• The title does not have the multilingual audio tracks.
	cannot be changed.	• The DVD-video prohibits the changing of the language for the sound
		track.
	The subtitle language cannot be	• Multilingual subtitle are not recorded on the DVD-video.
	changed or turned off.
	The angles cannot be changed.	• Multi-angles are not recorded on the DVD-video being played back.
		• The angle-change operation is whenever possible as long as the disc
		contains a multi-angle portion. Actual change will be performed when
		the portion has come up.
		• The DVD-video prohibits changing angles.
		• Try changing the angle using the DVD-video’s menu.
	Recording does not stop immediately	• It may take a few seconds for the unit to input disc data before
	after you press [STOP C].	recording stops.
	The disc tray does not open when you	• It may take a few seconds for the disc tray to open after you have
	press [OPEN/CLOSE A].	recorded or edited a disc. This is because the unit is adding disc data to
		the disc.

EN 81

Introduction Connections Basic Setup Recording Playback Editing Function Setup VCR Functions Others

Español