TIMER Indicator
ROG .
|
|
|
|
|
|
| E |
| N |
| 25 | ||
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
| ||||||||
|
|
| CHECK PROGRAM DATA |
| |||||||||
|
|
| The PlusCode number you |
| PROGRAM 1 | ||||||||
|
|
| entered and the matching | (VCR PLUS+ 12345678) |
| ||||||||
|
|
| 5 | START |
|
| STOP |
| |||||
|
|
| 8:00PM | = 10:00PM | |||||||||
|
|
| tion is displayed on the | DATE |
|
| CH | ||||||
|
|
| Program screen. Check to | 12/24/98 |
|
| 12 SP | ||||||
|
|
| make sure it’s accurate. | THU |
|
|
|
|
|
|
| ||
● To change the stop time, | STOP+/– = STOP TIME, SP/EP) | |
PRESS (OK) TO END | ||
press STOP | ||
| ||
● To | ||
(NUMBER “8”) or WEEKLY (NUMBER “9”). “DAILY” | ||
or “WEEKLY” appears on the Program screen. | ||
Pressing the button again makes each corresponding | ||
display disappear. |
| |
● If you made a mistake, press CANCEL to access the | ||
VCR Plus+ screen again and input the correct | ||
PlusCode number. |
| |
● If the PlusCode number you inputted is incorrect, | ||
"ERROR" may appear on the screen to advise you of | ||
1
NUMBER |
| 1 | 2 | 3 |
| 4 | 5 | 6 | |
|
| |||
| "8" | 7 | 8 | 9 |
|
| |||
SP/EP |
|
| 0 | 4 |
|
|
|
CANCEL
STOP+/–
3
OK
2
NUMBER | "9" |
|
TIMER
the error. This happens when the PlusCode number is |
for a program which has already passed. "ERROR" is |
displayed for about 5 seconds and the VCR Plus+ |
screen reappears. |
| SET TAPE SPEED |
6 Press SP/EP. | |
| RETURN TO NORMAL |
| SCREEN |
| Press PROG. or OK. "PROGRAM COMPLETED" |
| appears on the screen for about 5 seconds, then normal |
7 screen appears. | |
8 | ENGAGE TIMER MODE |
Press TIMER. The VCR turns off automatically and the | |
VCR's TIMER indicator lights. | |
ATTENTION
If there is a conflict in the timer schedule and one program overlaps with another, only the parts shown below in gray will be recorded.
Pattern 1: The program with the lower program number will be recorded.
10:00 | 11:00 | 12:00 | |||||
Program 1 |
| CH10 |
|
|
|
| |
Program 2 |
|
|
|
|
|
| Not recorded |
|
| CH40 |
|
|
| ||
Pattern 2: The program that is broadcast earlier will be recorded.
10:00 | 11:00 | 12:00 | ||||
Program 1 |
| CH10 |
|
|
|
|
Program 2 |
|
|
| Not recorded | ||
CH40 |
|
| ||||
Pattern 3: The program that is broadcast earlier will be recorded, followed by the remaining portion of the other program.
10:00 | 11:00 | 12:00 | ||
Program 1 |
| CH10 |
|
|
|
| Program 2 |
|
|
|
|
| CH40 | |
Not recorded
IMPORTANT
If you have moved to a different area or if a broadcasting station's channel number has been changed, the wrong VCR or CABLE CH number will be displayed on the VCR Plus+ Program screen in step 5. When this happens, set the correct the Guide Channel number for that station.
(☞ pg. 26, "VCR Plus+ Setup")
NOTES:
●To disengage the timer before recording starts, press TIMER again. Pressing once more
●In case of a power failure after programming, the VCR’s memory backup keeps your selections for approximately 3 minutes.
●When