JVC HR-A54U, HR-A34U instruction manual Specification S

Page 41

SPECIFICATIONS

EN41

GENERAL

Power requirement	: AC 120 V`, 60 Hz
Power consumption
Power on	: 22 W (HR-A54U)
	: 20 W (HR-A34U)
Power off	: 2 W
Temperature
Operating	: 5°C to 40°C (41°F to 104°F)
Storage	: –20°C to 60°C (–4°F to140°F)
Operating position	: Horizontal only
Dimensions (W x H x D) : 360 x 94 x 273 mm
	(14-3/16" x 3-3/4" x 10-3/4")
Weight	: 3.0 kg (6.6 lbs)
Format	: VHS NTSC standard
Maximum recording time
SP	: 210 min. with ST-210 video
	cassette
EP	: 630 min. with ST-210 video
	cassette
VIDEO/AUDIO
Signal system	: NTSC-type color signal and
	EIA monochrome signal, 525
Recording/	lines/60 fields
Recording/
Playback system	: DA-4 (Double Azimuth) head
	helical scan system
Signal-to-noise ratio	: 45 dB
Horizontal resolution	: 240 lines
Frequency range
Normal audio	: 70 Hz to 10,000 Hz
Hi-Fi audio
(HR-A54U only)	: 20 Hz to 20,000 Hz
Input/Output	: RCA connectors
	(IN x 1, OUT x 1)

TIMER

Clock reference	: Quartz
Program capacity	: 1-year programmable timer/
	8 programs
Memory backup time	: Approx. 3 min.
ACCESSORIES
Provided accessories	: RF cable (F-type),
	Infrared remote control unit,
	“AA” battery x 2

Specifications shown are for SP mode unless otherwise specified. E. & O.E. Design and specifications subject to change without notice.

TUNER

Tuning system	: Frequency-synthesized tuner
Channel coverage
VHF	: Channels 2–13
UHF	: Channels 14–69
CATV	: 113 Channels
RF output	: Channel 3 or 4 (switchable;
	preset to Channel 3 when
	shipped) 75 ohms,
	unbalanced

Image 41

Contents HR-A54U HR-A34U Do not place the VCR Dear CustomerPower Cord Protection Power SourcesPower Lines Grounding or PolarizationDamage Requiring Service AccessoriesCleaning Replacement PartsContents Basic Connections EN Installing Your NEW VCRBack of VCR Matching Transformer not suppliedConnect VCR to Power Source Check ContentsSituate VCR Connect VCR to TVLanguage OK or% ClockTo Make Corrections EN Initial Settings Access Tuner SETTuner SETAccess Manual Channel SET Screen Access Main MenuADD or Skip Desired ChannelLoad a Cassette Simple PlaybackFind Program Start Point Start PlaybackSimple Recording Playback Features Adjust Manual Tracking Engage Manual Tracking ModeRE-ENGAGE Automatic Tracking Manual TrackingVideo Stabilizer Layback and Recording FeaturesStart Repeat Reset Counter to ZeroSuperimpose Access Main Menu ScreenMode SET Mode Access Function SETSelect Audio Monitor Select The Soundtrack HR-A54U OnlyPreparation Auto PictureOr %to set to on or OFFTape in use PlaybackEngage TV Mode Recording FeaturesSelect Channel for Viewing Display Elapsed Time on ScreenTo Record SAP Programs Stereo And SAP Second Audio Program HR-A54U OnlyInput Receiving Channel Number VCR Plus+ Timer Programming HR-A54U OnlyEN Timer Recording Engage Timer Mode VCR Plus+ Guide Channel Matching VCR Plus+ Setup HR-A54U OnlyAccess Initial SET Screen Input Guide Channel Access Guide Channel SET ScreenNumber Repeat steps 5 and 6 forSET Channel Number Express Timer ProgrammingSET Program Date Press SP/EP to set the tape speed To Timer-Record Weekly Or Daily SerialsProgram Cancel or Revise aRE-ENGAGE Timer Auto Timer Auto SP→EP TimerPress REC on the front panel Engage ITR ModeSET Recording Duration Edit To Another VCR Player SET RECORDER’S Input ModeEdit From a Camcorder Or Another VCR Troubleshooting Re-perform the VCR Plus+ setup Timer againProcedure pg OubleshootingQuestions and Answer S E N Noise bars appear during search. What’s the problem?Can the VCR indefinitely remain in the still mode? Can the VCR indefinitely remain in the Record-Pause mode?Index Express Timer ProgrammingList Of Terms HR-A34U has only one Audio output connector HR-A34U has only one Audio input connectorOperating JVC TVs Installing BatteriesHow To Use Specification S Little Falls Road Fairfield, NJ For Servicing Only in U.S.A881-5923 954 415 Slater Drive Warranty Only in U.S.A. E NHR-A54U/34U