JVC HR-A54U, HR-A34U instruction manual Edit To Another VCR

Page 33

EDITING

EN33

Edit To Another VCR

Player

Your VCR

AUDIO OUT

VIDEO OUT

Audio/Video Cable (not supplied)

VIDEO IN

AUDIO IN

Recorder

Another VCR

PLAY

You can use your VCR as the player and another VCR as the recorder.

1	MAKE CONNECTIONS
	Connect an AV cable between your VCR's VIDEO OUT
	and AUDIO OUT connectors and another VCR’s
	VIDEO IN and AUDIO IN connectors.

For HR-A54U owners...

●When connecting to a monaural VCR, connect your VCR's AUDIO OUT L connector to the AUDIO IN connector on the monaural VCR.

For HR-A34U owners...

●When connecting to a Hi-Fi VCR, connect your VCR's AUDIO OUT connector to the AUDIO IN L connector on the Hi-Fi VCR.

	LOAD CASSETTES
	Insert the playback cassette into your VCR and the
2 cassette to be recorded on into the other VCR.
	SET RECORDER’S INPUT
3	MODE
3	Set the other VCR's auxiliary (AV) input mode.
4	START PLAYER
	Press PLAY on your VCR.
	NOTE:
	If you don't want to record the superimposed indication
	on the edited tape, be sure to set "SUPERIMPOSE" to
	OFF before pressing PLAY (☞ pg. 18).

5	START RECORDER
5	Set the other VCR to its record mode.

Image 33

Contents HR-A54U HR-A34U Do not place the VCR Dear CustomerPower Cord Protection Power SourcesPower Lines Grounding or PolarizationDamage Requiring Service AccessoriesCleaning Replacement PartsContents Basic Connections EN Installing Your NEW VCRBack of VCR Matching Transformer not suppliedConnect VCR to Power Source Check ContentsSituate VCR Connect VCR to TVLanguage Clock To Make CorrectionsOK or% EN Initial Settings Access Tuner SETTuner SETAccess Manual Channel SET Screen Access Main MenuADD or Skip Desired ChannelLoad a Cassette Simple PlaybackFind Program Start Point Start PlaybackSimple Recording Playback Features Adjust Manual Tracking Engage Manual Tracking ModeRE-ENGAGE Automatic Tracking Manual TrackingVideo Stabilizer Layback and Recording FeaturesStart Repeat Reset Counter to ZeroAccess Main Menu Screen ModeSuperimpose SET Mode Access Function SETSelect Audio Monitor Select The Soundtrack HR-A54U OnlyPreparation Auto PictureOr %to set to on or OFFTape in use PlaybackEngage TV Mode Recording FeaturesSelect Channel for Viewing Display Elapsed Time on ScreenTo Record SAP Programs Stereo And SAP Second Audio Program HR-A54U OnlyVCR Plus+ Timer Programming HR-A54U Only EN Timer RecordingInput Receiving Channel Number Engage Timer Mode VCR Plus+ Setup HR-A54U Only Access Initial SET ScreenVCR Plus+ Guide Channel Matching Input Guide Channel Access Guide Channel SET ScreenNumber Repeat steps 5 and 6 forExpress Timer Programming SET Program DateSET Channel Number Press SP/EP to set the tape speed To Timer-Record Weekly Or Daily Serials Cancel or Revise a RE-ENGAGE Timer Program Auto Timer Auto SP→EP TimerEngage ITR Mode SET Recording DurationPress REC on the front panel Edit To Another VCR SET RECORDER’S Input Mode Edit From a Camcorder Or Another VCRPlayer Troubleshooting Re-perform the VCR Plus+ setup Timer againProcedure pg OubleshootingQuestions and Answer S E N Noise bars appear during search. What’s the problem?Can the VCR indefinitely remain in the still mode? Can the VCR indefinitely remain in the Record-Pause mode?Express Timer Programming List Of TermsIndex HR-A34U has only one Audio output connector HR-A34U has only one Audio input connectorInstalling Batteries How To UseOperating JVC TVs Specification S For Servicing Only in U.S.A 881-5923 954 415Little Falls Road Fairfield, NJ Slater Drive Warranty Only in U.S.A. E NHR-A54U/34U