TIMER Indicator
PROG .
E
N
29
| SET TAPE SPEED |
7 Press SP/EP to set the tape speed. | |
| RETURN TO NORMAL |
| SCREEN |
| Press PROG. or OK. "PROGRAM COMPLETED" |
| appears on the screen for about 5 seconds, then normal |
8 screen appears. | |
9 | ENGAGE TIMER MODE |
Press TIMER. The VCR turns off automatically and the | |
VCR's TIMER indicator lights. | |
1
UMBER | 1 | 2 | |
4 | 5 | ||
| |||
"8" |
| ||
| 7 | 8 | |
SP/EP
0
3
OK
3
6
9
4
2
NUMBER "9"
TIMER
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 2 through 8, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials
NOTES:
●To disengage the timer before recording starts, press TIMER again. Pressing once more
●In case of a power failure after programming, the VCR’s memory backup keeps your selections for approximately 3 minutes.
●Programs that start after midnight must have the next day’s date.
●After timer recording is completed, the VCR’s power goes off automatically.
●You can program the timer while a regular recording is in progress; the
●If the end of tape is reached during timer recording, the cassette is automatically ejected.
●When
ATTENTION
If there is a conflict in the timer schedule and one program overlaps with another, only the parts shown below in gray will be recorded.
Pattern 1: The program with the lower program number will be recorded.
10:00 | 11:00 | 12:00 | |||||
Program 1 |
| CH10 |
|
|
|
| |
Program 2 |
|
|
|
|
|
| Not recorded |
|
| CH40 |
|
|
| ||
Pattern 2: The program that is broadcast earlier will be recorded.
10:00 | 11:00 | 12:00 | ||||
Program 1 |
| CH10 |
|
|
|
|
Program 2 |
|
|
| Not recorded | ||
CH40 |
|
| ||||
Pattern 3: The program that is broadcast earlier will be recorded, followed by the remaining portion of the other program.
10:00 | 11:00 | 12:00 | ||
Program 1 |
| CH10 |
|
|
|
| Program 2 |
|
|
|
|
| CH40 | |