JVC HR-A34U, HR-A54U Express Timer Programming, SET Program Date, SET Channel Number

28ENTIMERRECORDING(cont.)

Express Timer Programming

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

1

1 2 3

4 5 6 2

7 8 9

0 4

CH

START+/–

STOP+/– DATE+/–

3

You can directly program the VCR’s timer to record up to 8 shows, as far as a year in advance. Remember, the clock must be set before you can program the timer (☞ pg. 9).

LOAD A CASSETTE

1 Make sure the record safety tab is intact. If not, cover the hole with adhesive tape, then load it into the VCR.

●The VCR comes on, and the counter is reset, automatically.

	ACCESS PROGRAM
	SCREEN
	Press PROG.		PROGRAM 1
	If you own the HR-A54U,
			– –:– –AM	= – –:– –AM
2 press PROG., then START
			START		STOP
	+/–. (If you're just starting
			DATE		CH
	out, "PROGRAM 1"
			– –/– –/– –		– – –	SP
	appears.)	PRESS (+/–, SP/EP, 8=DAILY,
	● The screen to the right	9=WEEKLY), THEN (0K)
	appears.	PRESS (PROG.) TO END
	SET PROGRAM START TIME
	Press START +/– to enter		PROGRAM 1
	the time you want
3 recording to start.			START		STOP
			8:00 AM	=	– –:– –AM
	● Press and hold START		DATE		CH
			– –/– –/– –		– – –	SP
	+/– to move in 30-
	minute increments, or	PRESS (+/–, SP/EP, 8=DAILY,
	press and release	9=WEEKLY), THEN (0K)
	repeatedly to move 1	PRESS (PROG.) TO END
	minute at a time.
4	SET PROGRAM STOP TIME
	Press STOP +/– to enter the time you want recording to
	stop.

●Press and hold STOP +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

	SET PROGRAM DATE
	Press DATE +/–. (The current date is displayed on
5 screen. The date you enter appears in its place.)
6	SET CHANNEL NUMBER
	Press CH 5°.
	● Holding down CH 5°rapidly scans through the
	channels.
	● If you are using a cable box (or DBS receiver), enter
	the cable box (or DBS receiver) channel, not the
	channel to be recorded. The channel to be recorded
	must be selected on the cable box (or DBS receiver).
	(The cable box (or DBS receiver) channel is the VCR's
	channel that displays the channels received by the
	cable box (or DBS receiver).)