Marmitek 250205, 20095 owner manual 6in1 Universal remote Universal use

7. 6in1 Universal remote - Universal use

The 6in1 remote control provided does not only have the buttons for your TV Anywhere system (chapter 5), you can also control your TV, VCR, DVD player and satellite receiver with it! The remote control is pre-programmed at the factory for most brands and models of equipment.

7.1. Infrared extender

Your TV Anywhere system has a built-in infrared extender. This infrared extender lets you control your VCR, DVD player and satellite receiver, which are set up on the transmitter side, through walls and floors. To use the infrared extender, point your remote at the infrared receiver, which is located behind the window at the front of the TV Anywhere receiver. The infrared extender will also work with the original remote controls of your equipment (except 400kHz infrared systems like B&O).

To use the infrared extender the infrared extension cable must be connected to the TV Anywhere transmitter. Please see paragraph 4.2 for more details.

7.2. Button descriptions

[1](On/Off)

Allows you to turn off the device last selected. Some devices can also be turned on by pressing this button.

[2]RED LED indicator

The indicator light flashes when the remote control is operating or is continuously lit when programming the remote.

[3]CBL (TV anywhere), TV, VCR, DVD, ASAT (analogue satellite receiver), DSAT (digital satellite receiver)

These buttons allow you to select the device you wish to control.

[4] MUTE

Allows you to turn on/off the sound. You can control the "Mute" function of your TV even when you are in VCR, DVD or SAT mode, without switching to the TV mode.

[5]PROG +/-

Select the next or the previous channel of your TV or SAT. In DVD mode: next or previous chapter.

[6]VOL +/-

Allows you to control the volume. You can control the volume of your TV even when you are in VCR, DVD or SAT mode, without switching to the TV mode.

[7]SETUP

Allows you to program your remote control before the first use. It also allows you to access to secondary functions of certain A/V equipment (Shift). Press SETUP followed by the function button you want to set.

[8]SHIFT

12 MARMITEK