7.3.2 Automatic code search for some well-known brands
If your brand is listed below, you can use the brand search method (faster than the "manual" and the "automatic code search").
BRAND | CODE |
Philips/Radiola/Aristona/Erres | 1 |
Sony/Panasonic/JVC/Sharp/Akai/Toshiba/Daewoo | 2 |
Thomson/Brandt | 3 |
Telefunken/Saba/Nordmende | 4 |
Grundig/Blaupunkt | 5 |
Nokia/ITT | 6 |
|
|
1.Turn on the device you want to control.
2.Press and hold SETUP [7] until the LED indicator [2] stays lit. Release SETUP.
3.Press the mode button (3) that matches the device you wish to control. The LED [2] will flash once.
4.Enter the code for your brand, point the TV Anywhere Remote at your device and press Prog+ [5] once. Continue to point the TV Anywhere remote control at your equipment until the equipment changes Channel. (The remote control transmits an IR signal every second. Please wait until your device reacts) When your device does react, press ENT [11] to confirm. If you accidentally go past the code, you can stop the autosearch by pressing Prog- [5] and by repeatedly pressing this button return to the right code. Press ENT [11] to confirm.
☺If some functions of your device do not work, you need to try another code for your brand. The search function starts after the last confirmed code. For example, if it was 030, the search function starts at 031, and it will keep on trying until the last possible code.
7.3.3 Automatic code search for all brands
When searching an unknown code, you can step through the library automatically (AutoSearch). When your device responds, you can stop the searching process and store the code you found.
☺You can dedicate any device (TV, DVD, SAT...) to the VCR,DVD, ASAT or DSAT buttons. You first need to enter a
1.Turn on the device you want to control.
2.Press and hold SETUP [7] until the LED indicator [2] stays lit. Release SETUP.
3.Press the mode button [3] that matches the device you wish to control. The LED [2] will flash once.
TV ANYWHERE | 15 |