JVC LPT0319-001A, HR-S8700EK setup guide Edit From Camcorder

Page 54

46ADVANCEDOPERATIONS(cont.)

Edit From

A Camcorder

You can use a camcorder as the source player and your video recorder as the recorder.

1

MAKE CONNECTIONS

A If the camcorder has no S-VIDEO output connector...

... connect the camcorder’s AUDIO/VIDEO OUT

connectors to the recorder’s front panel AUDIO/

VIDEO input connectors.

 

B If the camcorder has an S-VIDEO output connector...

 

... connect the camcorder’s S-VIDEO OUT and

 

AUDIO OUT connectors to the recorder’s front

 

panel S-VIDEO and AUDIO input connectors.

1

2

AUX

1

2

–:–

1 2 3

4

5

6

7 8 9

0

3

4

4

3

PR

When using a monaural camcorder, connect its

AUDIO OUT connector to the AUDIO L input

connector on your recorder.

When a Master Edit Control-equipped JVC camcorder

is used, the camcorder is capable of controlling the

recorder. Refer to the camcorder’s instruction manual

for operating procedure.

SET RECORDER’S INPUT MODE

Press AUX and/or PR to select "F-1" for the AUDIO/

VIDEO input connectors, or "S-1" for the AUDIO/

S-VIDEO input connectors, depending on the connec-

2 tors being used.

SET EDIT MODE

3 See "Picture Control" on page 45.

NOTES:

All necessary cables can be obtained from your dealer.

You can also use another video recorder as the player instead of a camcorder.

When you select "EDIT" to dub tapes in step 3, be sure to select "AUTO" (or "NORM" when "B.E.S.T." is set to "OFF") after you finish dubbing the tapes.

4

START CAMCORDER

Engage its Play mode.

5

START RECORDER

Engage its Record mode.

AIf the camcorder has no S-VIDEO output connector...

Recorder

BIf the camcorder has an S-VIDEO output connector...

Recorder

 

 

To rear panel PAUSE

 

AUDIO

connector

VIDEO

 

input

 

input

 

 

 

 

To rear panel PAUSE

AUDIO input

connector

S-VIDEO

 

input

 

Audio Cable (not provided)

 

Video Cable (not provided)

Mini-Plug Cable

AUDIO OUT

(not provided)

(JVC camcorder

 

 

only)

Camcorder

VIDEO OUT

EDIT

Player

Audio Cable (not provided)

S-Video Cable (not provided)

S-VIDEO OUT

Camcorder

AUDIO OUT

EDIT

Player

Mini-Plug Cable (not provided) (JVC camcorder only)

Image 54
Contents HR-S8700EK Safety Precautions Connection to the mains supply in the United KingdomMoisture Condensation Do not place the recorderSome Dos And Donts On The Safe Use Of Equipment Quick SET UP Guide Connect Video Recorder to TV Back of TVBack of Recorder Mains outlet Mains Power Cord Video ConnectionTion pg and the TV is turned on, Before performing the following procedure, make sure thatWith the AV or S-VIDEO connection Go to itemLink screen will appear. Then the Guide Remote control while downloading is10 or If -- appears on the display panel, refer Program number setIf auto channel set has succeeded but auto clock set has not If both auto channel set and auto clock set have failedLink Functions Access Main Menu ScreenAccess Mode SET Screen Turn on the RecorderSatellite Receiver Control Setting Check Result of Test Select Satellite RECEIVER’S Channel for TestingEnter Satellite RECEIVER’S Brand CodeFind Programme Start Point PlaybackLoad a Cassette Start PlaybackPause During Playback Activate HIGH-SPEED SearchRecording Engage ITR Mode Select Preset to WatchReset Counter SET Counter DisplayAccess Video PLUS+ Program Screen Video Plus+ Timer ProgrammingAccess Video PLUS+ Screen Enter Pluscode NumberTimer Warning PDC RecordingStart Time Express Timer ProgrammingEnter Programme TimeSET Tape Speed SET PDC ModeTimer Mode Return to NormalCheck, Cancel And Replace Programmes Confirm Overlapping Programmes When programmes overlap each otherCancel or Change Programme Setting ModifyNavigation Turn OFF Navigation Check MemoryReturn to Normal Screen Turn Off NavigationSelect Tape Number Access Find Blank Space ScreenTitle Editing Load a CassetteEdit Tape Title Access Video Navigation ScreenEnter Character Select Tape NumberSelect Programme Select CategoryEdit Programme Title Category Delete Tape Data Delete ProgrammeData Delete Programme DataAccess Video Access Find Title ScreenAccess Tape NO. Screen Finding TitleSelect Programme Load a Cassette Access Date ScreenSelect Programme Access Category Screen Sorting By DateNavigation Check Memory Title Editing Access Main Menu Screen Select Programme Return to Normal Screen Finding Title Access Date Screen Override Automatic Tracking Playback Picture AdjustmentAdjust Tracking ManuallyDigital 3R SET ModeMode Video StabilizerSelecting Sound You Want Access REC LevelAdjust Audio Control ScreenDuring Playback Receiving Nicam Stereo And Bilingual ProgrammesSoundtrack Selection Type of Broadcast On-screen Display Being ReceivedSkip Over Unwanted Looking For Scene You WantActivate Index Search SectionsSelect S-VHS Mode Recording According To Tape TypeSuper VHS S-VHS VHS ET and VHS Select B.E.S.T. Mode Playback/ Recording According To Tape Charac- teristicsS.T. Picture System Playback Start PlaybackRecording During B.E.S.TSatellite Receiver Unit Connector TV Aerial cable Audio in connectorAutomatic Satellite Programme Recording AerialREC Mode Access Main Menu ScreenSelect L-2 Select Mode ScreenSET Remote Control Code Remote Control FunctionsRemove Power Supply RE-SUPPLY PowerSET TV Brand Code Control Your TV Using Additional ButtonsTV Multi-Brand Remote Control Operate TVOperate Satellite Receiver Satellite Receiver Multi Brand Remote ControlBrand Code NumberControl SET Mode Access Main MenuAccess Mode SET Minimizing Picture Degradation While EditingEdit From Camcorder Synchro Edit connector Lanc Cable not provided Synchro EditingPress Synchro /8again Repeat steps 4 6 as necessary Edit To Or From Another Video Recorder Input ModeSET Edit Mode SET Recording DECK’SRecorder Player OUTPUT/INPUT Setting SELECT/INPUT SettingAudio Dubbing Reset the Counter Insert EditingLocate END Point END Insert Editing Engage Insert EditingStart Editing Press InsertAccess Jlip ID NO. SET Screen Terminal JLIPJoint Level Interface Protocol ConnectorAccess Initial SET Screen Information On J TerminalON-SCREEN Display ENABLE/DISABLEOther Functions On-Screen DisplaySelect Power Save Mode Power Save ModePress %Þ to move the highlight bar pointer to Auto SP→LP Timer Access Mode SET ScreenAuto Timer Next Function MemoryEngage RECORD-PAUSE Mode Stop PlaybackResume Recording Connection To Stereo System Speaker TelevisionVideo Channel Set Access Video Channel SET ModeExit Video Channel SET Mode SET Video ChannelTest Signal With RF ConnectionAuto Channel Set Tuner SetPerform Auto Channel SET Pointer to Auto CHView Confirmation Screen Enter NEW Channel Information Storing Channels ManuallyInput Channel Close Confirmation ScreenFine-Tuning Channels Already Stored When Receiving a Scrambled BroadcastChange Station Preset Position Delete a ChannelEnter NEW Character TV Station And ID List Station NameTV Station Channel Number Guide Clock Set Video Plus+ System Setup NumberGuide Program Number Set Questions And Answers Ä remain lit on the display panel. Is there Problem?What happens if the tape runs out during recording? Troubleshooting Won’t stop blinking Record Safety tab removed RecordingOther Problems Index Front ViewRear View Display Panel VCRRemote Control TV Muting Button mutes soundRemote Control LCD Fast Forward FF Button same as button onMaximum recording time DA4 Double Azimuth helical