JVC LPT0002-027B specifications Regular Timer Programming, EN Timer RECORDINGcont

30ENTIMERRECORDING(cont.)

Regular Timer Programming

Remember, the clock must be set before you can programme the timer (☞ pg. 49).

Before performing the following steps:

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

		8
6		5/8
q	1	Á

7 8 9

0 4

START+/–

TV/SAT./VCR

STOP+/–

3

PROG./MENU 1

ILLUMI GUIDE

When Using The Illumi-Guide Feature

●Buttons light or blink on the remote control for approximately 10 seconds. If the button or buttons extinguish during timer programming, press ILLUMI GUIDE and the button or buttons previously lit or blinking come back on. If the button or buttons do not re-light or start blinking again, press MENU and re-perform the timer programming procedure from the beginning.

●If for some reason the remote control's signal is not received by the video recorder, press MENU and re-perform the timer programming procedure from the beginning.

If you don’t know the SHOWVIEW number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme. Or you can use the Illumi-Guide feature, where the remote control tells you which button to press next by lighting it up. To use the Illumi-Guide feature, with the TV/SAT./VCR switch set to "VCR", press ILLUMI GUIDE before performing step 1. (PROG., REW, PLAY,

FFlight up at this time.)

If you aren't going to use the Illumi-Guide feature, go directly to step 1.

	ACCESS TIMER
1	PROGRAMMING SCREEN
	Press PROG.
	● If you are using the Illumi-Guide feature, the following
	buttons will light up: NUMBER keys (0–9), START +/–,
	STOP +/–,DATE +/–,TV PROG. +/–,MENU and
	CANCEL.
2	ACCESS PROGRAMME SCREEN
	Press START +/–. (If you’re				– P1 –
	just starting out, “P1”			START			STOP
	appears.)
				–:– –	=		–:– –
				SP				ON
			DATE			TV PROG
			25.12					– –
		[+/–] =
		[MENU] : EXIT

The front display panel looks like this:

SP

●If you are using the Illumi-Guide feature, the following buttons will light up: START +/–, STOP +/–, DATE +/–, TV PROG. +/– and MENU.

ENTER PROGRAMME START TIME

3	Press START +/– to enter				– P1 –
	the time you want			START			STOP
	recording to start.
				21:00	=		–:– –
	● Press and hold START			SP				ON
	+/– to move in 30-			DATE		TV PROG
	minute increments, or
	press and release		25.12					– –
	repeatedly to move 1
		[+/–] =
	minute at a time.	[MENU] : EXIT

The front display panel looks like this:

SP

●If you are using the Illumi-Guide feature, the following buttons remain lit: START +/–, STOP +/–, DATE +/–, TV PROG. +/– and MENU.

ENTER PROGRAMME STOP TIME

4 Press STOP +/– to enter the time you want recording to stop.

●If you are using the Illumi-Guide feature, the following buttons remain lit: START +/–, STOP +/–, DATE +/–, TV PROG. +/– and MENU.