JVC LPT0002-027B Preparation, Move the highlight bar pointer to Clock SET by, Screen appears

CLOCKSET

EN49

Turn on the TV and select the VIDEO channel (or AV mode).

2

1 2 3

4 5 6

7 8 9

04

3 OK

MENU 1

PUSH JOG

IMPORTANT

Perform the following steps only if auto clock set has not been set correctly by Auto Set Up function (☞ pg. 4) or Auto Channel Set (☞ pg. 44) or if the recorder's memory backup has expired.

If you performed Auto Set Up or Auto Channel Set without ever having set the clock previously, the recorder’s built-in clock is also set automatically. The Auto and Manual clock setting procedures are necessary when . . .

–a power outage of more than 60 minutes occurs.

–the tuner has been set manually.

–the user desires to set the clock slightly ahead of the actual time.

–the clock was not set even after Auto Set Up or Auto Channel Set was performed.

Whether you perform Auto or Manual clock setting, you can use the convenient Just Clock function.

Just Clock

The Just Clock function provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal.

The Just Clock option appears in the Clock Set and Auto Clock screens, and can be set “ON” or “OFF” (the default setting is “OFF”). Press OK until the Just Clock setting begins blinking, then press PUSH JOG%Þ to change the setting.

IMPORTANT: If you turn off Just Clock, the accuracy of your recorder’s built-in clock may be reduced, which could adversely effect timer recording. We recommend you to keep Just Clock on. In cases where the clock setting data from a PDC signal is incorrect, however, you are advised to keep Just Clock set to "OFF".

*Just Clock does not work in areas where no TV station transmits PDC signals.

Both Auto and Manual clock setting procedures begin from step 4.

Preparation

1	TURN THE RECORDER ON
	Press			.
2	ACCESS MAIN MENU SCREEN
	Press MENU twice.
3	ACCESS CLOCK SET SCREEN
	Move the highlight bar (pointer) to "CLOCK SET" by
	pressing PUSH JOG %Þ, then press OK. The Clock Set
	screen appears.
			MAIN MENU				CLOCK SET
		MODE SET					TIME	DATE	YEAR
		AUTO CH SET					0: 00	01 . 01	00
		MANUAL CH SET					JUST	CLOCK : OFF
		GUIDE PROG SET
							TV PR.	: 1
		CLOCK SET			SET
		JLIP ID NO.
						[5] : AUTO CLOCK
		[5°] =				[5°] =
		[MENU] : EXIT				[MENU] : EXIT

CONTINUED ON NEXT PAGE.