JVC KV-V8 service manual FDP display model FDP display

1.6 Emergency display function

This unit has a function for storing the history of the past two emergencies (EMG) and displaying them on each FDP (or OSD). With the status of the VCR and mechanism at the moment an emergency occurred can also be confirmed.

FDP display model [FDP display]

0 : 00 : 00 Normal display

E: * * : * *		EMG content display
		(E:Latest:Previous)
*1: *2	: 34	EMG detail information <1>
		EMG detail information <2>
*5: *6	: *7

OSD display model [OSD display]

EMG	EMG content display
	(E:Latest:Previous)
E : * * : * *

*1: *2 : 34 EMG detail information <1>

*5: *6 : *7 EMG detail information <2>

Notes:

•The EMG detail information <1><2> show the information on the latest EMG.

It becomes “ – – : – – : – –” when there is no latest EMG record.

•When using the Jig RCU, set its custom code to match the custom code of the VCR.

Jig RCU

[Data transmitting method] Depress the “ ” ( 3 ) button after the data code is set.

CUSTOM CODE	INITIAL MODE
43: A CODE

53:B CODE DATA CODE

Fig. 1-6a Jig RCU [PTU94023B]

1.6.1Displaying the EMG information

(1)Transmit the code “59” from the Jig RCU.

The FDP shows the EMG content in the form of “E: * * : * * ”.

Example 1 E : 01 : 03

Previous EMG

Latest EMG

Example 2 E : – – : – – No EMG record

Notes:

•For the OSD display model, all EMG information are showed by transmitting first code from the Jig RCU.

•For the EMG content, see “1.6.3 EMG content descrip- tion”.

(2)Transmit the code “59” from the Jig RCU again.

The FDP shows the EMG detail information <1> in the form of “ * 1 : * 2 : 34 ”.

*1 : Deck operation mode at the moment of EMG

*2 : Mechanism operation mode at the moment of EMG

3– : Mechanism sensor information at the moment of

EMG

–4 : Mechanism mode position at the moment of EMG

Note:

•For the EMG detail information <1> , see “1.6.4 EMG de- tail information <1> ”.

(3)Transmit the code “59” from the Jig RCU once again.

The FDP shows the EMG detail information <2> in the form of “ * 5 : * 6 : * 7 ”.

*5 : Type of the cassette tape in use <1> .

*6 : Winding position of the cassette tape in use

*7 : Type of the cassette tape in use <2> (Winding area)

Note:

•For the EMG detail information <2> , see “1.6.5 EMG de- tail information <2>”.

(4)Transmit the code “59” from the Jig RCU once again to re- set the display.

1.6.2Clearing the EMG history

(1)Display the EMG history.

(2)Transmit the code “36” from the Jig RCU.

(3)Reset the EMG display.

1-5