44 EN | EDITING (cont.) |
Edit To Or
From Another
VCR
Connection |
|
|
|
Ex. When using this VCR as the playback VCR | |||
This VCR (for playback) | |||
| CABLE | PAUSE/ | IN OUT ANT.IN |
| AV | ||
| BOX | COMPU |
|
|
|
| |
|
| AUDIO |
|
|
| VIDEO | RF OUT |
|
|
| |
|
| CH3 CH4 |
|
To AUDIO/ |
|
|
|
VIDEO OUT |
|
|
|
| Audio/video cable | ||
| (not supplied) | ||
Another VCR | To Audio/ | ||
(for recording) | video Input |
You can use your VCR as the playback or recording VCR. Refer also to the other VCR’s instruction manual for connection and its operations.
1Make connections
Connect an audio/video cable between the playback VCR’s audio/video output connectors and the recording VCR’s audio/video input connectors.
When using this VCR as the recording VCR, connect this VCR’s audio/video input connectors to the audio/video output connectors on the other VCR.
If the playback VCR is monaural, connect the audio output connector on the playback VCR to the left audio input connector on this VCR.
2 Load cassettes
Insert the playback cassette into the playback VCR and the cassette to be recorded on into the recording VCR.
3 Select input mode on recording VCR Select the correct external input on the other VCR.
On this VCR (when using this VCR as the recording VCR);
Select
Select
On the front panel:
Press CH5°.
On the Remote:
Press the Number key "0 (AUX)" or CH
4 Select EDIT function
Set the EDIT function to “ON”.
ON this VCR, follow the procedure described on pages 38 and 39.
5 Start playback
Press PLAY ( 3 ) on the playback VCR.
NOTE:
If the playback VCR is equipped with a superimpose/ OSD disable feature then set it to “OFF” before starting playback ( pg. 38 and 39).
6Start recording
Press REC ( ƒ ) on the recording VCR.
NOTE:
Be sure to select “AUTO” for “PICTURE CONTROL” (or “NORM” when “AUTO PICTURE” is set to “OFF”) after you finish dubbing the tapes ( pg. 38 and 39).