JVC HR-VP68U manual 52 EN, Can the VCR indefinitely remain in still mode?

Page 52

52 EN

TROUBLESHOOTING (cont.)

Questions and answers

PLAYBACK

Q. What happens if the tape reaches its end during playback or search?

A. The VCR automatically rewinds it to the beginning.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.Can the VCR indefinitely remain in still mode?

A.No. It stops automatically after 5 minutes to protect

the heads.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.During picture search, still picture playback and frame-by-frame playback, the picture is intermittent. What’s the cause?

A.Picture loss occurs when these types of playback are attempted with a tape recorded in LP mode. Pressing PLAY ( 3 ) to return to normal playback will restore

the picture.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q. When returning from variable-speed picture search to normal playback, the picture is disturbed. Should I be concerned about this?

A. No, it is normal.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q. When playing back programs that have been timer- recorded consecutively (such one program from 8:00 to 9:00 and another one from 9:00 to 10:00), the picture and sound become momentarily distorted where the first program ends and the second program begins. Is this a malfunction?

A. No. This is normal.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q. Other than preventing further recording, what effect does removing the safety tab have?

A. It disables marking of index codes.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q. Sometimes, during index search, the VCR cannot find the program I want to see. Why not?

A. There may be index codes too close together.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.During playback, on-screen display sometimes jitters. Why does this happen?

A.If the condition of the tape being played back is not good, jittering of the video (including on-screen display) may occur.

RECORDING

Q.When I pause and then resume a recording, the end of the recording before the pause is overlapped by the new recording. Why does this happen?

A.This is normal. It reduces distortion at the pause and

resume points.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.Can the VCR indefinitely remain in the recording pause mode?

A.No. The VCR automatically stops after 5 minutes to protect the heads. When paused during Instant Timer Recording (ITR), the VCR shuts off automatically after

5 minutes.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.What happens if the tape reaches its end during recording?

A.The VCR automatically rewinds it to the beginning.

TIMER RECORDING

Q.REC and ä remain lit on the front display panel. Is there a problem?

A.No. This is a normal condition for a timer recording

in progress.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Q.Can I program the timer while I’m watching a tape or a TV broadcast?

A.Yes, but while you are setting the timer you will not see the tape’s or broadcast program’s picture as it is replaced by the on-screen menu. (The sound from the tape or broadcast program will be heard during the timer setting.)

Image 52
Contents HR-VP68U Dear Customer Telephone NumberPower Sources Power LinesPower Cord Protection Grounding or PolarizationAccessories Damage Requiring ServiceCleaning Replacement PartsContents Audio OUT not supplied AC Power Cord Basic ConnectionsAntenna or cable Coaxial cableCheck contents Situate VCRConnect VCR to TV Final preparation for usePerform Plug & Play setup Plug & Play SettingWhat to do if Plug & Play setting failed Language Setting Access Main Menu screenAccess Initial Set screen Select languageClock Setting 10 ENPreparations Select clock setSetting clock semiautomatically Set Auto Clock to onSelect host channel Select time zoneSetting clock manually Select D.S.T. mode12 EN Manual Clock SetAccess Tuner Set screen Tuner SettingPerform Auto Channel Set Setting channels manually Access Manual Channel Set screen14 EN Add or skip desired channelsCable Box Control Setting Situate ControllerAttach Controller Connect cable box to VCRAccess Cable Box Set screen 16 ENTurn on cable box Select cable box output channelEnter cable box brand AccessPress OKCable. Box Brand Set screenIf the cable boxs channel does not change to How to control the DBS receiver 18 ENConnect DBS receiver to VCR DBS receiver Controller Your VCRsuggested LocationsTurn on DBS receiver Access DBS Receiver Set screenSelect DBS receiver output channel 20 EN Access DBS Receiver Brand Set screenEnter DBS Receiver’s brand Load a cassette Basic PlaybackStart playback Basic Playback Features 22 ENChanging display information Checking tape positionSelecting monitor sound Adjusting tracking conditionAutomatic operations after Locating beginning of timer Access distant code24 EN Locating beginningBasic Recording Select recording channelSet tape speed Start recordingBasic Recording Features 26 ENSpecifying recording length Watching one program while recording anotherShowing on-screen display Display VCR status on TV screenErase on-screen display Other useful functions for recordingSpecial Effect Playback 28 ENLocating particular scene Rapidly Picture Search High-Speed Picture SearchViewing still picture Skipping unwanted portionsViewing slow motion picture Pause during playbackVCR Plus+ Timer Programing 30 ENEngage timer recording standby mode To use the VCR while it is in timer recording standby modeInput receiving channel number Press SP/EP32 EN VCR Plus+ SetupVCR Plus+ guide channel matching Access Guide Channel Set screen Input guide channel numberExpress Timer Programing 34 ENTo timer-record daily Monday-Friday or weekly serials Checking program settings 36 ENSelect program to modify Confirm overlapping programsOverlapping programs blink on the screen Useful Function Settings Change setting38 EN Select FunctionWhen this function is set to on When this function is set to OFF40 EN For ExampleThis VCR Edit From Camcorder 42 ENConnection This VCR for recordingSelect input mode on this VCR Access Main Menu screen on this VCREnable remote pause function Make connectionsEdit To Or From Another 44 ENLoad cassettes Select Edit functionTV Brand Setting Turn on the TVSet TV brand code Operate TVCable Box Brand Setting 46 ENTurn on the cable box Enter cable box brand codeDBS Receiver Brand Setting Turn on the DBS receiverEnter DBS receiver brand code Operate DBS receiverChanging Remote Control Code 48 ENPower Timer Recording 50 ENOther Problems Can the VCR indefinitely remain in still mode? 52 ENWhat happens if the tape reaches its end during recording? List of terms VCR PLUS+Front panel 54 ENFront display panel Rear panel On-screen display56 EN How to use the RemoteRemote Full-Size VHS 30 ST-30 Usable cassettesCompact VHS* TC-20 ST-C20 TC-30 ST-C30 TC-40 ST-C40 HOW to Locate Your JVC Service Center 58 ENLimited Warranty HR-VP68U