JVC HR-VP68U Make connections, Select input mode on this VCR, Access Main Menu screen on this VCR

Page 43

EN 43

You can use a camcorder as the playback VCR and your VCR as the recording VCR

1 Make connections

Connect an audio/video cable between the camcorder’s audio/video output connectors and your VCR’s video audio/video input connectors.

When the JVC camcorder is equipped with the Master Edit Control, you can control the VCR from the camcorder. Connect the mini-plug cable (not supplied with this VCR) as illustrated to the left.

When using a camcorder with a monaural output, connect the audio output connector on the camcorder to the left audio input connector on this VCR.

2 Load a cassette

Insert the cassette to be recorded on into this VCR (for recording).

3 Select input mode on this VCR

Select “L-1” — when connecting the camcorder to the audio/video input connectors on the rear panel.

Select “F-1” — when connecting the camcorder to the audio/video input connectors on the front panel.

On the front panel:

Press CH5°.

On the Remote:

Press the Number key "0 (AUX)" or CH +/–.

4 Access Main Menu screen on this VCR

Press MENU.

5 Access Function Set screen

On the front panel:

Press CH5° to move the highlight bar (arrow) to “FUNCTION SET”, then press OK.

On the Remote:

Press SHUTTLE PLUS %Þ to move the highlight bar (arrow) to “FUNCTION SET”, then press OK or SHUTTLE PLUS #.

6Select “EDIT” for Picture Control

Follow the procedure described on pages 37 and 38.

If your camcorder is a JVC Master Edit Control- equipped type — go to step 7.

If your camcorder is NOT a JVC Master Edit Control-equipped type — go to step 8.

7Enable remote pause function

On the front panel:

 

FUNCTION

 

 

Press CH5° to move

 

=PICTURE CONTROL

ON

 

 

PICTURE CONTROL

AUTO

 

the highlight bar (arrow)

 

AUTO TIMER

OFF

 

to “AV COMPU-LINK”,

 

SUPERIMPOSE

ON

 

 

AUTO SP=EP TIMER

OFF

 

then press OK to set it to

 

VIDEO STABILIZER

OFF

 

 

NEXT PAGE

 

 

“OFF”.

 

 

 

SELECT WITH (5,°) AND (OK)

 

On the Remote:

PRESS (MENU) TO END

 

 

 

 

 

 

Press SHUTTLE PLUS

 

 

 

 

%Þ to move the

 

PREVIOUS PAGE

 

 

highlight bar (arrow) to

 

 

 

 

BLUE BACK

ON

 

“AV COMPU-LINK”,

 

2ND AUDIO RECORD

OFF

 

then press OK or

 

AUDIO MONITOR

HI-FI

 

 

=AV COMPU-LINK

OFF

 

SHUTTLE PLUS # to set

 

 

 

 

it to “OFF”.

 

 

 

 

 

SELECT WITH (5,°) AND (OK)

 

The REMOTE PAUSE/

 

PRESS (MENU) TO END

 

 

AV COMPU-LINK

 

 

 

 

connector works as the AV Compulink

 

 

connector when “AV COMPU-LINK” is set to “ON” ; pg. 38 and 41), and works as the Remote Pause connector when “AV COMPU- LINK” is set to “OFF”.

8Return to normal screen

Press MENU.

9Start playback

Press PLAY ( 3 ) on the camcorder.

NOTE:

If the camcorder is equipped with a superimpose/OSD disable feature then set it to “OFF” before starting playback.

0Start recording

On the front panel:

Press REC ( ƒ ).

On the Remote:

Press REC ( ƒ ) and PLAY ( 3 ) at the same time.

If you are using a Master Edit Control-equipped JVC camcorder, recording starts automatically on this VCR. (Refer to camcorder’s instruction manual.)

NOTE:

Be sure to select “AUTO” for “PICTURE CONTROL” (or “NORM” when “AUTO PICTURE” is set to “OFF”) after you finish dubbing the tapes ( pg. 38 and 39).

Page 42 Page 44
Image 43
Page 42 Page 44
Contents HR-VP68U Telephone Number Dear CustomerGrounding or Polarization Power SourcesPower Lines Power Cord ProtectionReplacement Parts AccessoriesDamage Requiring Service CleaningContents Coaxial cable Audio OUT not supplied AC Power CordBasic Connections Antenna or cableFinal preparation for use Check contentsSituate VCR Connect VCR to TVPerform Plug & Play setup Plug & Play SettingWhat to do if Plug & Play setting failed Select language Language SettingAccess Main Menu screen Access Initial Set screenSelect clock set Clock Setting10 EN PreparationsSelect time zone Setting clock semiautomaticallySet Auto Clock to on Select host channelManual Clock Set Setting clock manuallySelect D.S.T. mode 12 ENAccess Tuner Set screen Tuner SettingPerform Auto Channel Set Add or skip desired channels Setting channels manuallyAccess Manual Channel Set screen 14 ENConnect cable box to VCR Cable Box Control SettingSituate Controller Attach ControllerSelect cable box output channel Access Cable Box Set screen16 EN Turn on cable boxEnter cable box brand AccessPress OKCable. Box Brand Set screenIf the cable boxs channel does not change to DBS receiver Controller Your VCRsuggested Locations How to control the DBS receiver18 EN Connect DBS receiver to VCRTurn on DBS receiver Access DBS Receiver Set screenSelect DBS receiver output channel 20 EN Access DBS Receiver Brand Set screenEnter DBS Receiver’s brand Load a cassette Basic PlaybackStart playback Checking tape position Basic Playback Features22 EN Changing display informationSelecting monitor sound Adjusting tracking conditionAutomatic operations after Locating beginning Locating beginning of timerAccess distant code 24 ENStart recording Basic RecordingSelect recording channel Set tape speedWatching one program while recording another Basic Recording Features26 EN Specifying recording lengthOther useful functions for recording Showing on-screen displayDisplay VCR status on TV screen Erase on-screen displayRapidly Picture Search High-Speed Picture Search Special Effect Playback28 EN Locating particular scenePause during playback Viewing still pictureSkipping unwanted portions Viewing slow motion picture30 EN VCR Plus+ Timer ProgramingPress SP/EP Engage timer recording standby modeTo use the VCR while it is in timer recording standby mode Input receiving channel number32 EN VCR Plus+ SetupVCR Plus+ guide channel matching Input guide channel number Access Guide Channel Set screen34 EN Express Timer ProgramingTo timer-record daily Monday-Friday or weekly serials 36 EN Checking program settingsSelect program to modify Confirm overlapping programsOverlapping programs blink on the screen Select Function Useful Function SettingsChange setting 38 ENWhen this function is set to OFF When this function is set to onFor Example 40 ENThis VCR This VCR for recording Edit From Camcorder42 EN ConnectionMake connections Select input mode on this VCRAccess Main Menu screen on this VCR Enable remote pause functionSelect Edit function Edit To Or From Another44 EN Load cassettesOperate TV TV Brand SettingTurn on the TV Set TV brand codeEnter cable box brand code Cable Box Brand Setting46 EN Turn on the cable boxOperate DBS receiver DBS Receiver Brand SettingTurn on the DBS receiver Enter DBS receiver brand code48 EN Changing Remote Control CodePower 50 EN Timer RecordingOther Problems Can the VCR indefinitely remain in still mode? 52 ENWhat happens if the tape reaches its end during recording? VCR PLUS+ List of termsFront panel 54 ENFront display panel On-screen display Rear panel56 EN How to use the RemoteRemote Full-Size VHS 30 ST-30 Usable cassettesCompact VHS* TC-20 ST-C20 TC-30 ST-C30 TC-40 ST-C40 58 EN HOW to Locate Your JVC Service CenterLimited Warranty HR-VP68U
Top Page Image Contents