Editing, Select Setting | JVC HR-J680EK, HR-J682EK instruction

JVC HR-J680EK, HR-J682EK manual Editing, Select Setting

advanced features

Editing

L-2 SELECT Setting

Set L-2 SELECT to the appropriate mode depending on the type of unit connected to the rear panel AV2 (L-2) IN/DECODER connector of this VCR.

get to the mode set screen Press m. Move the highlight bar to MODE SET using the Aand Bbuttons and press O(or E).

select l-2 select mode Move the highlight bar to L-2 SELECT using the A and Bbuttons. Press O(or E) to select the desired mode:

¥a/v To use this VCR as the recording deck with the player connected to the AV2 (L-2) IN/DECODER connector, or to use the satellite receiver connected to the AV2 (L-2) IN/DECODER connector.

¥decoder To use a decoder connected to the AV2 (L-2) IN/DECODER connec- tor.

¥sat To view a satellite programme with the TV set while the VCR is turned off.

return to normal screen Press m.

Notes

¥When L-2 SELECT is set to SAT, it is possible to view a satellite broadcast with the TV set to its AV mode even if the VCR is turned off. When the VCR is in the stop mode or recording, press TV/VCR on the Remote Control to turn off the VCR indicator on the display panel.

If you turn on the VCR when the satellite receiverÕs power is off, nothing appears on the TV screen. In this case, turn of the satellite receiver, or set the TV to its TV mode, or press TV/VCR on the Remote Control to set the VCR to the video mode.

¥When L-2 SELECT is set to SAT, SAT appears on the TV screen or SAt on the display panel instead of L-2.

¥If you have a satellite receiver or a decoder connected to the AV2 (L-2) IN/ DECODER connector, be sure to set L-2 SELECT back to appropriate mode after editing.

¥If youÕre not connecting a satellite receiver or a decoder to the AV2 (L-2) IN/ DECODER connector, leave L-2 SELECT set to A/V.

¥The default setting is A/V; if the VCRÕs memory backup has expired due to a power cut or because the AC was removed from the VCR, A/V will be auto- matically selected when the power is restored to the VCR. If you are using a satellite receiver or a decoder, be sure to set L-2 SELECT back to appropriate mode.